Heat‐Transfer Modeling of Rapid, Large‐Area UV ‐Assisted Sintering of TiO 2 Films for Perovskite Solar Modules

ABSTRACT Titanium dioxide (TiO 2 ) is extensively utilized as an electron transport layer (ETL) in photovoltaic devices because of its high electron mobility and electron selectivity. However, high‐performance TiO 2 ETLs typically require high‐temperature sintering to obtain high crystallinity and interparticle connectivity, limiting their compatibility with flexible substrates. Several low‐temperature sintering methods suffer from insufficient film uniformity, limited scalability, and restricted substrate compatibility. Ultraviolet (UV)‐assisted sintering has emerged as a promising alternative but the fundamental heat‐transfer mechanism and the quantitative correlations between UV‐irradiation parameters (lamp‐to‐sample distance, peak wavelength, and power) and the resulting temperature distributions remain insufficiently understood. Here, a coupled radiative‐conductive heat‐transfer model is developed and experimentally validated to clarify transient top‐down heating and the vertical temperature gradients during UV sintering. Systematic parameter mapping identifies optimal operating condition that maximize the film‐substrate temperature difference () while maintaining the flexible substrate temperature below its glass‐transition temperature. Under the optimized condition, the model predicts = 40.21 K with saturation within 20 s, and experiments confirm dense, highly crystalline TiO 2 ETLs on flexible substrates without thermal deformation. Consequently, perovskite solar modules incorporating UV‐sintered TiO 2 ETLs achieve power conversion efficiencies of 20.58% on glass and 16.19% on flexible substrates (aperture area: 31 cm 2 ). image

Authors

Institutions

Publication Details

Journal
EcoMat
Published
2026-11-16
DOI
https://doi.org/10.1002/eom2.70105
Primary Topic
TiO2 Photocatalysis and Solar Cells
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Heat‐Transfer Modeling of Rapid, Large‐Area UV ‐Assisted Sintering of TiO 2 Films for Perovskite Solar Modules

Min‐cheol Kim, Jihun Jang, Byungsoo Kang, Hee Jeong Park et al.
EcoMat
TiO2 Photocatalysis and Solar Cells
article

Heat‐Transfer Modeling of Rapid, Large‐Area UV ‐Assisted Sintering of TiO 2 Films for Perovskite Solar Modules

Min‐cheol Kim, Jihun Jang, Byungsoo Kang, Hee Jeong Park, Seunghwan Bae, Jooyeon Shin, Sua Park, Hee-Suk Jung, Hye Ryeong Lee, 유용석
article en

Abstract

ABSTRACT Titanium dioxide (TiO 2 ) is extensively utilized as an electron transport layer (ETL) in photovoltaic devices because of its high electron mobility and electron selectivity. However, high‐performance TiO 2 ETLs typically require high‐temperature sintering to obtain high crystallinity and interparticle connectivity, limiting their compatibility with flexible substrates. Several low‐temperature sintering methods suffer from insufficient film uniformity, limited scalability, and restricted substrate compatibility. Ultraviolet (UV)‐assisted sintering has emerged as a promising alternative but the fundamental heat‐transfer mechanism and the quantitative correlations between UV‐irradiation parameters (lamp‐to‐sample distance, peak wavelength, and power) and the resulting temperature distributions remain insufficiently understood. Here, a coupled radiative‐conductive heat‐transfer model is developed and experimentally validated to clarify transient top‐down heating and the vertical temperature gradients during UV sintering. Systematic parameter mapping identifies optimal operating condition that maximize the film‐substrate temperature difference () while maintaining the flexible substrate temperature below its glass‐transition temperature. Under the optimized condition, the model predicts = 40.21 K with saturation within 20 s, and experiments confirm dense, highly crystalline TiO 2 ETLs on flexible substrates without thermal deformation. Consequently, perovskite solar modules incorporating UV‐sintered TiO 2 ETLs achieve power conversion efficiencies of 20.58% on glass and 16.19% on flexible substrates (aperture area: 31 cm 2 ). image

EcoMatVol. 8(12)
Advanced Analysis Center (JP), Pusan National University (KR), Korea Institute of Industrial Technology (KR)
TiO2 Photocatalysis and Solar Cells
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon