Modification of mechanical properties of silty soils by biopolymers for construction purposes

Silty soils tend to deform plastically, erode and slide downward easily when exposed to moisture in the Hyrcanian forests of Iran. Biopolymers are an approach to overcome negative effects of silty soils; however, the effect of biopolymers on mechanical properties of this specific type of soil is not clear. The present experimental study investigated the efficacy of xanthan gum (XG), guar gum (GG), and beta-glucan (BG) on the Atterberg limits, maximum dry density (MDD), and California Bearing Ratio (CBR) of a high plasticity silty soil (MH). Each biopolymer was applied at dosages of 0, 0.1, 0.2, 0.4, and 0.6% and cured for 7 and 28 days. Atterberg limits (ASTM D4318), grain size distribution (ASTM D 422-63), proctor density (ASTM D1557) and bearing ratio (ASTM D1883) of treated MH soil was done in three replications. The results showed that the liquid limit (LL), plastic limit (PL), and plasticity index (PI) of the treated samples decreased with increasing of XG. A change in soil class from MH to low-plasticity silt (ML) was observed with the addition of 0.2% and 0.4% BG. The highest increase in MDD (+10.9%) and CBR (+60.0%) of MH soils was recorded with the addition of 0.4% BG. Therefore, in this treatment, the MDD and CBR reached 1.73 g cm-3 and 12.24%, respectively, after 28 days. Based on our findings, adding GG to MH soils did not yield favorable results compared to other treatments (5.1% increase in MDD and 20.0% increase in CBR). The optimum dosage was found to be 0.2% for GG and 0.4% for BG, while a notably higher dosage of 0.6% was deemed optimum for XG. These findings suggest that the mechanical characteristics of MH soils treated with BG solutions can be effectively utilized for road sub-base improvement applications in forest ecosystems.

Authors

Institutions

Publication Details

Journal
Croatian journal of forest engineering
Published
2026-11-17
DOI
https://doi.org/10.5552/crojfe.2027.4524
Primary Topic
Geotechnical Engineering and Soil Stabilization
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Modification of mechanical properties of silty soils by biopolymers for construction purposes

Aidin Parsakhoo, Seyed Ataollah Hosseini
1 links
Croatian journal of forest engineering
Geotechnical Engineering and Soil Stabilization
article

Modification of mechanical properties of silty soils by biopolymers for construction purposes

Aidin Parsakhoo, Seyed Ataollah Hosseini
article en

Abstract

Silty soils tend to deform plastically, erode and slide downward easily when exposed to moisture in the Hyrcanian forests of Iran. Biopolymers are an approach to overcome negative effects of silty soils; however, the effect of biopolymers on mechanical properties of this specific type of soil is not clear. The present experimental study investigated the efficacy of xanthan gum (XG), guar gum (GG), and beta-glucan (BG) on the Atterberg limits, maximum dry density (MDD), and California Bearing Ratio (CBR) of a high plasticity silty soil (MH). Each biopolymer was applied at dosages of 0, 0.1, 0.2, 0.4, and 0.6% and cured for 7 and 28 days. Atterberg limits (ASTM D4318), grain size distribution (ASTM D 422-63), proctor density (ASTM D1557) and bearing ratio (ASTM D1883) of treated MH soil was done in three replications. The results showed that the liquid limit (LL), plastic limit (PL), and plasticity index (PI) of the treated samples decreased with increasing of XG. A change in soil class from MH to low-plasticity silt (ML) was observed with the addition of 0.2% and 0.4% BG. The highest increase in MDD (+10.9%) and CBR (+60.0%) of MH soils was recorded with the addition of 0.4% BG. Therefore, in this treatment, the MDD and CBR reached 1.73 g cm-3 and 12.24%, respectively, after 28 days. Based on our findings, adding GG to MH soils did not yield favorable results compared to other treatments (5.1% increase in MDD and 20.0% increase in CBR). The optimum dosage was found to be 0.2% for GG and 0.4% for BG, while a notably higher dosage of 0.6% was deemed optimum for XG. These findings suggest that the mechanical characteristics of MH soils treated with BG solutions can be effectively utilized for road sub-base improvement applications in forest ecosystems.

Croatian journal of forest engineeringVol. 48(1)
University of Tehran (IR), Gorgan University of Agricultural Sciences and Natural Resources (IR)
Life on land, Industry, innovation and infrastructure
Geotechnical Engineering and Soil Stabilization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon