Topology-optimized additive manufacturing design of a power transformer clamping plate
Clamping plates are load-bearing insulating components that maintain winding compression and structural stability in three-phase power transformers. This study presents a topology-optimization-driven redesign of a transformer clamping plate for large-scale material extrusion additive manufacturing. A finite element model of the baseline C2R pressboard component was developed under representative assembly and operational loads and used as the reference for optimization. Candidate thermoplastics were screened based on dielectric performance, compatibility with mineral oil and ester, and tensile properties, leading to the selection of PEKK-C. Manufacturing-aware constraints, including overhang angle, minimum member size, symmetry, and preserved functional interfaces, were incorporated into the workflow. The optimized design achieved 33% volume and 10% mass reductions while satisfying the defined displacement and stress criteria. These results indicate improved material efficiency and design consolidation potential, although experimental validation remains necessary.
Authors
- Flávia V. Barbosa (ORCID: https://orcid.org/0000-0003-1570-5786)
- João R. Matos (ORCID: https://orcid.org/0000-0002-6271-0070)
- Catarina Costa (ORCID: https://orcid.org/0000-0002-5788-2150)
- L. Garrido (ORCID: https://orcid.org/0009-0005-1411-7204)
- J. Castro (ORCID: https://orcid.org/0009-0006-3159-9070)
- Helena Lopes
Institutions
- Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (PT)
Publication Details
- Journal
- U Porto Journal of Engineering
- Published
- 2026-11-16
- DOI
- https://doi.org/10.24840/2183-6493_0012-002_003723
- Primary Topic
- Topology Optimization in Engineering
- Type
- article
- Field-Weighted Citation Impact
- 0.00