Evaluation of Microchannels for Particle Measurement Fabricated with a Consumer 3D Printer
Resistive pulse sensing (RPS), also known as Coulter counting, is a valuable technology for individually counting and measuring particles. However, practical implementation of microfluidic RPS requires appropriate sensing-region geometry and reproducible aperture fabrication. In this study, we fabricated PDMS microchannels for particle measurement using molds produced with an inexpensive consumer-grade stereolithography (SLA) 3D printer. The mold for the microchannel was designed using 3D modeling software, converted into data for the 3D printer, and then printed. The resulting mold was used to transfer the pattern to polydimethylsiloxane, which was then bonded to a glass substrate to produce the microchannel for particle measurement. For a nominal aperture width of 50 µm, the measured aperture width was 48.3 ± 6.0 µm (mean ± standard deviation, n = 8). Detectable RPS pulse signals were obtained from MDA-MB-231 cells and 10 µm polystyrene particles. The estimated primary material cost was approximately 37 JPY per microchannel (approximately USD 0.23 at 160 JPY/USD); this estimate excludes equipment, labor, utilities, and other non-primary-material costs. The complete fabrication process required approximately 2–3 days, and the resin mold was single-use in the present procedure. The present study represents a proof-of-concept evaluation; quantitative counting efficiency, detection limit, and particle-sizing accuracy were not established.
Authors
- Masato Yasuura (ORCID: https://orcid.org/0000-0003-2334-8088)
- Hiroki Ashiba (ORCID: https://orcid.org/0000-0002-8764-8357)
- Ken-ichi Nomura (ORCID: https://orcid.org/0000-0001-9459-1101)
- Yukichi Horiguchi (ORCID: https://orcid.org/0000-0002-6748-9643)
Institutions
- National Institute of Advanced Industrial Science and Technology (JP)
Publication Details
- Journal
- Sensors
- Published
- 2026-11-17
- DOI
- https://doi.org/10.3390/s26227240
- Primary Topic
- Microfluidic and Capillary Electrophoresis Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00