Source-Dependent Performance of Calcium Silicate-Based Co-Products Derived from Phosphoric Acid Production Processes

The phosphate fertilizer industry generates large quantities of phosphogypsum, motivating beneficial-use pathways that convert phosphate-industry residuals into construction materials. This study evaluated calcium silicate-rich J-Rox co-products produced through two source routes: phosphate ore-derived J-Rox from the phosphoric acid production route (JR-P) and phosphogypsum-derived J-Rox from the phosphogypsum recovery route (JR-G). Finely ground J-Rox was examined as a supplementary cementitious material through a staged paste–mortar–concrete framework, while coarsely ground phosphogypsum-derived J-Rox sand was evaluated as a prewetted internal curing aggregate. Paste testing assessed setting behavior, mortar testing evaluated workability-controlled compressive strength and sulfate attack resistance, and concrete testing validated JR-G materials (JR-G1 and JR-G2) in binary, ternary J-Rox–slag, and internally cured systems. JR-P materials produced more systematic setting delay, likely influenced by higher P2O5 contents, while JR-G materials showed more variable but practical setting behavior. Mortar strength results were material- and dosage-dependent, with 15% replacement giving the most consistent response. Sulfate expansion provided the clearest source-route distinction: all JR-G mixtures remained below the 0.1% expansion threshold at 26 weeks, with an average expansion of 0.0560%, while five of the six JR-P mixtures exceeded this threshold, with an average expansion of 0.1499%. At the concrete scale, binary JR-G mixtures achieved practical 28-day strength, with the 15JR-G2 mixture reaching 7593 psi at 91 days compared with 6694 psi for the OPC control. Ternary mixtures containing 15% JR-G and 35% slag showed strong later-age strength gain, increased surface resistivity, and reduced drying shrinkage at 50% OPC replacement. Specifically, the 15JR-G2/35S mixture achieved a 91-day compressive strength of 7372 psi, while the 15JR-G1/35S mixture exhibited a 112-day drying shrinkage of −0.011%, compared with −0.066% for the OPC control. These results indicate that phosphogypsum-derived J-Rox use in concrete materials shows promise, particularly when used in ternary, performance-engineered blended binder systems.

Authors

Institutions

Publication Details

Journal
Construction Materials
Published
2026-11-17
DOI
https://doi.org/10.3390/constrmater6060107
Primary Topic
Concrete and Cement Materials Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Source-Dependent Performance of Calcium Silicate-Based Co-Products Derived from Phosphoric Acid Production Processes

Brett Q. Tempest, Jamshid M. Armaghani, Tara L. Cavalline, Mark Vignovic et al.
2 links
Construction Materials
Concrete and Cement Materials Research
article

Source-Dependent Performance of Calcium Silicate-Based Co-Products Derived from Phosphoric Acid Production Processes

Brett Q. Tempest, Jamshid M. Armaghani, Tara L. Cavalline, Mark Vignovic, Clarke J. Summers, Shubham Mishra, Samantha R. Doughty
article en

Abstract

The phosphate fertilizer industry generates large quantities of phosphogypsum, motivating beneficial-use pathways that convert phosphate-industry residuals into construction materials. This study evaluated calcium silicate-rich J-Rox co-products produced through two source routes: phosphate ore-derived J-Rox from the phosphoric acid production route (JR-P) and phosphogypsum-derived J-Rox from the phosphogypsum recovery route (JR-G). Finely ground J-Rox was examined as a supplementary cementitious material through a staged paste–mortar–concrete framework, while coarsely ground phosphogypsum-derived J-Rox sand was evaluated as a prewetted internal curing aggregate. Paste testing assessed setting behavior, mortar testing evaluated workability-controlled compressive strength and sulfate attack resistance, and concrete testing validated JR-G materials (JR-G1 and JR-G2) in binary, ternary J-Rox–slag, and internally cured systems. JR-P materials produced more systematic setting delay, likely influenced by higher P2O5 contents, while JR-G materials showed more variable but practical setting behavior. Mortar strength results were material- and dosage-dependent, with 15% replacement giving the most consistent response. Sulfate expansion provided the clearest source-route distinction: all JR-G mixtures remained below the 0.1% expansion threshold at 26 weeks, with an average expansion of 0.0560%, while five of the six JR-P mixtures exceeded this threshold, with an average expansion of 0.1499%. At the concrete scale, binary JR-G mixtures achieved practical 28-day strength, with the 15JR-G2 mixture reaching 7593 psi at 91 days compared with 6694 psi for the OPC control. Ternary mixtures containing 15% JR-G and 35% slag showed strong later-age strength gain, increased surface resistivity, and reduced drying shrinkage at 50% OPC replacement. Specifically, the 15JR-G2/35S mixture achieved a 91-day compressive strength of 7372 psi, while the 15JR-G1/35S mixture exhibited a 112-day drying shrinkage of −0.011%, compared with −0.066% for the OPC control. These results indicate that phosphogypsum-derived J-Rox use in concrete materials shows promise, particularly when used in ternary, performance-engineered blended binder systems.

Construction MaterialsVol. 6(6)
University of North Carolina at Charlotte (US), University of Southern Indiana (US), Novaphos (United States) (US)
Responsible consumption and production, Industry, innovation and infrastructure
Concrete and Cement Materials Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon