Electrochemically Driven Surface Reconstruction Enables High-Voltage Stability in O3-Type Cathodes for Sodium-ion batteries
Higher charge cutoff voltages are required to achieve higher energy density in O3-type layered oxide cathodes for sodium-ion batteries (SIBs). However, high-voltage operation typically induces irreversible phase transitions and oxygen loss, exacerbating structural degradation and accelerating capacity decay. Here, we demonstrate that high-voltage formation can instead improve cycling stability via electrochemically driven surface reconstruction. Using O3-NaNi 1/3 Fe 1/3 Mn 1/3 O 2 (NFM) as a model cathode, multimodal characterization reveals that the surface structure established after the formation governs subsequent structural evolution. Formation to 4.3 V induces lattice distortion that evolves into a thick heterogeneous surface layer comprising rock-salt and defective spinel phases, thereby accelerating capacity decay. In contrast, formation to 4.5 V pre-constructs a thin, uniform rock-salt layer that alleviates mechanical stress, suppresses bulk structural evolution, and mitigates interfacial side reactions over prolonged cycling. Raising the formation voltage from 4.3 V to 4.5 V leads to a 16% improvement in capacity retention. This work highlights the critical role of formation protocols in stabilizing layered oxide cathodes and identifies prefabrication of the cathode surface as a practical strategy for developing high-energy, long-life SIBs.
Authors
- Yuyu Deng
- 焦丽芳
- 邢桂英
- Jieran Liu
- Shaohui Yuan
- Qinglun Wang
- Ting Jin
Publication Details
- Journal
- CCS Chemistry
- Published
- 2026-11-17
- DOI
- https://doi.org/10.31635/ccschem.026.202608767
- Primary Topic
- Advancements in Battery Materials
- Type
- article
- Field-Weighted Citation Impact
- 0.00