High-Speed Wire Arc Additive Manufacturing: Investigating the Influence of Heat Input, Transfer Modes and Parameter Selection

Wire arc additive manufacturing (WAAM) offers significant potential for large-scale metallic component manufacture. However, current research shows limited investigation into the distinct effects of heat input and metal transfer mode at the high travel speeds associated with automated welding. This study investigates the effects of these variables on the deposition characteristics, microstructural evolution and mechanical properties of ER70S-6 WAAM depositions. Single-pass, multi-pass and thin-wall structures were manufactured using short-circuit and spray transfer modes. Single-pass depositions with minimal defects were produced, with lower heat input conditions generating narrower and taller beads due to reduced lateral spreading and increased cooling rates. The heat-sink effect dominated the microstructural evolution, producing comparable microstructures despite heat input variations between process parameters. During multi-pass depositions at 1000 mm/min, porosity within the top layer highlighted the limitations of short-circuit transfer with increasing travel speed. Spray transfer enabled low-defect depositions at higher travel speeds. Thin walls demonstrated the ability to build at travel speeds reaching 1600 mm/min utilising spray transfer. This study concludes that spray transfer is desirable for high-speed depositions, although parameter selection requires careful consideration to maintain practical build rates.

Authors

Institutions

Publication Details

Journal
Applied Sciences
Published
2026-11-17
DOI
https://doi.org/10.3390/app162211370
Primary Topic
Additive Manufacturing Materials and Processes
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

High-Speed Wire Arc Additive Manufacturing: Investigating the Influence of Heat Input, Transfer Modes and Parameter Selection

Andrew Gorrie, Athanasios Toumpis, Ryan Stevenson, Keagan De Menezes et al.
4 links
Applied Sciences
Additive Manufacturing Materials and Processes
article

High-Speed Wire Arc Additive Manufacturing: Investigating the Influence of Heat Input, Transfer Modes and Parameter Selection

Andrew Gorrie, Athanasios Toumpis, Ryan Stevenson, Keagan De Menezes, Jonah McNicol
article en

Abstract

Wire arc additive manufacturing (WAAM) offers significant potential for large-scale metallic component manufacture. However, current research shows limited investigation into the distinct effects of heat input and metal transfer mode at the high travel speeds associated with automated welding. This study investigates the effects of these variables on the deposition characteristics, microstructural evolution and mechanical properties of ER70S-6 WAAM depositions. Single-pass, multi-pass and thin-wall structures were manufactured using short-circuit and spray transfer modes. Single-pass depositions with minimal defects were produced, with lower heat input conditions generating narrower and taller beads due to reduced lateral spreading and increased cooling rates. The heat-sink effect dominated the microstructural evolution, producing comparable microstructures despite heat input variations between process parameters. During multi-pass depositions at 1000 mm/min, porosity within the top layer highlighted the limitations of short-circuit transfer with increasing travel speed. Spray transfer enabled low-defect depositions at higher travel speeds. Thin walls demonstrated the ability to build at travel speeds reaching 1600 mm/min utilising spray transfer. This study concludes that spray transfer is desirable for high-speed depositions, although parameter selection requires careful consideration to maintain practical build rates.

Applied SciencesVol. 16(22)
University of Strathclyde (GB)
Industry, innovation and infrastructure
Additive Manufacturing Materials and Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon