Reference-Point-Dependent turning radii: A low-cost laboratory activity using an asymmetric two-wheel system
Rolling motion integrates translational and rotational motion, rolling constraints, and rigid-body kinematics, yet undergraduate laboratory activities rarely allow multiple reference-point trajectories to be compared within the same rolling system. This study develops and mechanically validates a low-cost asymmetric two-wheel apparatus for investigating the turning radii of the inner wheel, outer wheel, axle midpoint, and centre of mass. A unified kinematic formulation defines these radii in the horizontal rolling plane while accounting for the projected axle length and the mass-dependent centre-of-mass position. Seven apparatus configurations were tested in five repeated releases each (35 trials). The four trajectory diameters were determined independently from floor-referenced physical measurements, yielding 140 experimental radius measurements. No inner-wheel, axle-midpoint, or centre-of-mass radius was reconstructed from the measured outer-wheel trajectory. Mean percentage errors were 4.40%, 3.39%, 1.64%, and 2.76% for the inner wheel, axle midpoint, centre of mass, and outer wheel, respectively, with relative standard deviations below 1.7%. The independently determined wheel trajectories also verified R 2 − R 1 = L c o s θ , with discrepancies below 0.65% for all configurations. Constructed from inexpensive cardboard wheels and a wooden-skewer axle, the apparatus provides an accessible and reproducible platform for investigating reference-point-dependent rolling kinematics. A classroom implementation framework is proposed, while learning effectiveness remains to be evaluated separately.
Authors
- Edy Wibowo (ORCID: https://orcid.org/0000-0002-5593-5183)
- Putut Marwoto (ORCID: https://orcid.org/0000-0001-8926-9441)
- Mamat Rokhmat (ORCID: https://orcid.org/0009-0005-1127-4386)
- Naily Ulya
- Sutisna Sutisna (ORCID: https://orcid.org/0000-0002-3833-3914)
Institutions
- State University of Semarang (ID)
- Universitas Jember (ID)
- Centre for Sustainable Energy (GB)
- Universitas Kebangsaan Republik Indonesia (ID)
- Sustainable Energy Systems (United Kingdom) (GB)
- Telkom University (ID)
Publication Details
- Journal
- International Journal of Mechanical Engineering Education
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1177/03064190261507167
- Primary Topic
- Experimental and Theoretical Physics Studies
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Universitas Telkom
- Direktorat Riset dan Pengabdian Masyarakat