Fluid-Driven Generative Design of a Passive Venturi Pump for Shower Graywater Reuse: Organic Forms, Stronger Suction and a Biomimetic Perspective
Reusing shower graywater for toilet flushing saves drinking water, but existing systems rely on powered components. The ShowerChiottes concept uses a passive venturi pump, fitted between the tap and the shower hose, whose jet creates a vacuum intended to lift graywater into a sealed tank. We asked whether reshaping only its suction chamber by fluid-driven generative design strengthens suction. The chamber was generated with the Fluid Path study of Autodesk Fusion 360 for three air-inlet orientations. The designs were ranked by single-phase lattice Boltzmann simulations at 6 L/min, and the initial pump and the printed design, derived from the parallel-inlet outcome, were tested at a closed air inlet. Parallel and perpendicular inlets increased an unvalidated simulated suction indicator by 25% and 22%, against 4% for an oblique inlet. At an equal low flow rate, the printed design produced four times the depression of the initial pump (890 against 225 Pa), and its suction vanished at 6.3–7.1 L/min instead of 2.0–2.7 L/min. The static lift, at most 30 cm, remains insufficient in practice. For the perpendicular inlet, the algorithm recovered the co-flowing inlet of classical jet pumps. Biological analogies, drawn only a posteriori, suggest initializing generative design with bio-inspired forms.
Authors
- Baptiste Oudon
- Arnaud Coutu (ORCID: https://orcid.org/0000-0001-6698-7854)
- Maxime Denis (ORCID: https://orcid.org/0009-0007-4451-343X)
- Arthur Desroche
- Georges Husband
Institutions
- UniLaSalle (FR)
Publication Details
- Journal
- Biomimetics
- Published
- 2026-11-17
- DOI
- https://doi.org/10.3390/biomimetics11110837
- Primary Topic
- Architecture and Computational Design
- Type
- article
- Field-Weighted Citation Impact
- 0.00