Effects of Temperature and Assembly Conditions on the Bearing Performance of Composite Single-Bolt Double-Shear Joints

Aircraft composite bolted joints may be exposed to a wide range of service temperatures, yet the coupled effects of temperature and assembly conditions on their bearing performance remain insufficiently understood. This study investigated an epoxy-based carbon-fiber-reinforced polymer (CFRP)-to-metal single-bolt double-shear joint designed for a subsonic aircraft. Quasi-static bearing tests were conducted at −55 °C, 25 °C, and 70 °C to determine the ultimate loads and characterize the damage morphologies around the hole. A progressive-damage finite element model was subsequently developed to evaluate the effects of bolt–hole clearance, interference fit, and tightening torque. The mean experimental ultimate load decreased from 17.950 kN at −55 °C to 13.864 kN at 70 °C, representing a reduction of 22.8%. The corresponding relative deviations between the numerical and experimental results were 3.36%, 1.87%, and 0.79%. Bearing damage was the dominant failure mode at all three temperatures; damage propagation was more localized at −55 °C, whereas damage initiated earlier at 70 °C. The simulations showed that a 2% clearance provided relatively high bearing strength, a 2–3% interference fit yielded favorable load-carrying performance, and a 4% interference fit caused pronounced initial damage around the hole. Moderate tightening torque improved the bearing strength at −55 °C and 25 °C, whereas the strength generally decreased with increasing torque at 70 °C. These findings clarify the temperature dependence of assembly effects and provide guidance for the design of composite joints operating over a wide temperature range.

Authors

Institutions

Publication Details

Journal
Materials
Published
2026-11-17
DOI
https://doi.org/10.3390/ma19224864
Primary Topic
Mechanical Behavior of Composites
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effects of Temperature and Assembly Conditions on the Bearing Performance of Composite Single-Bolt Double-Shear Joints

Ruochuan Zhou, Bowen Liu, Pan Li, Dahai Zhang et al.
3 links
Materials
Mechanical Behavior of Composites
article

Effects of Temperature and Assembly Conditions on the Bearing Performance of Composite Single-Bolt Double-Shear Joints

Ruochuan Zhou, Bowen Liu, Pan Li, Dahai Zhang, Shibo Liang, Kaixin He
article en

Abstract

Aircraft composite bolted joints may be exposed to a wide range of service temperatures, yet the coupled effects of temperature and assembly conditions on their bearing performance remain insufficiently understood. This study investigated an epoxy-based carbon-fiber-reinforced polymer (CFRP)-to-metal single-bolt double-shear joint designed for a subsonic aircraft. Quasi-static bearing tests were conducted at −55 °C, 25 °C, and 70 °C to determine the ultimate loads and characterize the damage morphologies around the hole. A progressive-damage finite element model was subsequently developed to evaluate the effects of bolt–hole clearance, interference fit, and tightening torque. The mean experimental ultimate load decreased from 17.950 kN at −55 °C to 13.864 kN at 70 °C, representing a reduction of 22.8%. The corresponding relative deviations between the numerical and experimental results were 3.36%, 1.87%, and 0.79%. Bearing damage was the dominant failure mode at all three temperatures; damage propagation was more localized at −55 °C, whereas damage initiated earlier at 70 °C. The simulations showed that a 2% clearance provided relatively high bearing strength, a 2–3% interference fit yielded favorable load-carrying performance, and a 4% interference fit caused pronounced initial damage around the hole. Moderate tightening torque improved the bearing strength at −55 °C and 25 °C, whereas the strength generally decreased with increasing torque at 70 °C. These findings clarify the temperature dependence of assembly effects and provide guidance for the design of composite joints operating over a wide temperature range.

MaterialsVol. 19(22)
Southeast University (CN)
National Natural Science Foundation of China
Mechanical Behavior of Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon