Accessible Fabrication and Functional Characterization of Polyethersulfone Ultrafiltration Membranes: Effects of NIPS Processing Conditions on Permeability and MWCO

Polyethersulfone (PES) ultrafiltration membranes were fabricated by non-solvent-induced phase separation (NIPS) and characterized through water permeability and molecular weight cut-off (MWCO) measurements. The influence of polymer concentration, coagulation bath temperature, and casting thickness on membrane performance was investigated using accessible characterization methodologies. A total of 27 membrane fabrication experiments were conducted using three PES concentrations (18, 20, and 22 wt.%), three coagulation bath temperatures (6, 8, and 10 °C), and three nominal casting thicknesses (60, 75, and 90 μm). Water permeability ranged from approximately 9 to 80 L m−2 h−1 bar−1, demonstrating a strong influence of fabrication conditions on membrane performance. Polymer concentration was identified as the dominant factor controlling both permeability and MWCO. Increasing PES concentration produced membranes with lower permeability and lower MWCO values, consistent with the reduction in effective pore size, although direct morphological characterization was beyond the scope of this study. Coagulation bath temperature significantly affected both permeability and selectivity, whereas casting thickness significantly affected permeability but showed no significant influence on MWCO. Statistical analysis further revealed a significant interaction between polymer concentration and coagulation bath temperature for MWCO. The results demonstrated a clear permeability–selectivity trade-off characteristic of ultrafiltration membranes prepared by NIPS. Furthermore, the combined use of permeability and MWCO measurements provided sufficient information to identify the effects of fabrication parameters on membrane performance, highlighting the usefulness of accessible characterization methodologies for membrane development, optimization, and technology transfer.

Authors

Institutions

Publication Details

Journal
Membranes
Published
2026-11-17
DOI
https://doi.org/10.3390/membranes16110388
Primary Topic
Membrane Separation Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Accessible Fabrication and Functional Characterization of Polyethersulfone Ultrafiltration Membranes: Effects of NIPS Processing Conditions on Permeability and MWCO

Jaime Lora-García, Jose Luis Soler-Cabezas, Paola Andrea Alvizuri-Tintaya, M.I. Iborra–Clar et al.
1 links
Membranes
Membrane Separation Technologies
article

Accessible Fabrication and Functional Characterization of Polyethersulfone Ultrafiltration Membranes: Effects of NIPS Processing Conditions on Permeability and MWCO

Jaime Lora-García, Jose Luis Soler-Cabezas, Paola Andrea Alvizuri-Tintaya, M.I. Iborra–Clar, Jennifer Michelle López-Jiménez, Alicia Iborra Clar
article en

Abstract

Polyethersulfone (PES) ultrafiltration membranes were fabricated by non-solvent-induced phase separation (NIPS) and characterized through water permeability and molecular weight cut-off (MWCO) measurements. The influence of polymer concentration, coagulation bath temperature, and casting thickness on membrane performance was investigated using accessible characterization methodologies. A total of 27 membrane fabrication experiments were conducted using three PES concentrations (18, 20, and 22 wt.%), three coagulation bath temperatures (6, 8, and 10 °C), and three nominal casting thicknesses (60, 75, and 90 μm). Water permeability ranged from approximately 9 to 80 L m−2 h−1 bar−1, demonstrating a strong influence of fabrication conditions on membrane performance. Polymer concentration was identified as the dominant factor controlling both permeability and MWCO. Increasing PES concentration produced membranes with lower permeability and lower MWCO values, consistent with the reduction in effective pore size, although direct morphological characterization was beyond the scope of this study. Coagulation bath temperature significantly affected both permeability and selectivity, whereas casting thickness significantly affected permeability but showed no significant influence on MWCO. Statistical analysis further revealed a significant interaction between polymer concentration and coagulation bath temperature for MWCO. The results demonstrated a clear permeability–selectivity trade-off characteristic of ultrafiltration membranes prepared by NIPS. Furthermore, the combined use of permeability and MWCO measurements provided sufficient information to identify the effects of fabrication parameters on membrane performance, highlighting the usefulness of accessible characterization methodologies for membrane development, optimization, and technology transfer.

MembranesVol. 16(11)
Universitat Politècnica de València (ES), Universidad Católica Boliviana San Pablo (BO)
Membrane Separation Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon