Vitrimerization Routes for Waste PET Upcycling
The accumulation of massive post-consumer poly(ethylene terephthalate) (PET) waste poses severe ecological hazards. Conventional mechanical recycling induces irreversible chain scission and severe property depreciation, while chemical depolymerization consumes excessive energy and toxic solvents, creating a performance-cost downcycling bottleneck limiting high-value PET reuse. This comprehensive critical review highlights vitrimer chemistry based on associative dynamic exchange as a transformative upcycling solution. The field is organized around two fabrication routes—depolymerization-reconstruction and in-situ/direct network construction while preserving the PET backbone—together with a cross-cutting transesterification catalytic dimension covering externally catalyzed, self-catalytic, and metal-free, no-added-catalyst (including residual-catalyst-assisted), and fully catalyst-free designs. Solvolysis-derived oligomers afford vitrimers with tunable glass transition temperature (Tg) (38~240 °C) and tensile strength up to 117 MPa; solvent-free extrusion fits continuous industrial lines, and metal-free designs may reduce heavy-metal contamination. Several optimized systems retain over 80% mechanical performance after cyclic reprocessing, although significant variations exist; for example, the bis(2-hydroxyethyl) terephthalate (BHET)/pyromellitic dianhydride (PMDA)/trimethylolpropane (TMP) vitrimer decreases from approximately 30 MPa to 16 MPa after two compression-molding cycles. These technologies show potential for closed-loop recycling and reprocessability, may reduce virgin resin demand, and may reduce carbon footprints, pending full life-cycle assessment. Major industrial barriers include insufficient creep resistance, incomplete monomer recovery, and non-uniform testing standards. This work delivers integrated theoretical and engineering guidance for scalable PET vitrimer circular-material development.
Authors
- Wanlin Xu (ORCID: https://orcid.org/0009-0002-7712-0855)
- Ruixia Duan (ORCID: https://orcid.org/0000-0002-3984-4070)
- Chengshen ZHU
- Lin Na
- He Suqin
- Miaoming Huang
- Liu Wentao
- Liu Hao
- Qiu Shuheng
Institutions
- Zhengzhou University (CN)
Publication Details
- Journal
- Green Chemical Technology
- Published
- 2026-11-17
- DOI
- https://doi.org/10.70322/gct.2026.10036
- Primary Topic
- Polymer composites and self-healing
- Type
- article
- Field-Weighted Citation Impact
- 0.00