Impact of using the axe in motor-manual felling on hand-arm vibrations

Although the axe is the feller's main tool alongside the chainsaw, it has been neglected in previous studies from the point of view of occupational health and safety. The aim of the study was therefore to determine the share of axe use in the productive time of motor-manual felling and the contribution of the axe to the overall exposure of the feller to hand-arm vibration (HAV). The study was conducted during the felling of 43 spruce and fir trees with a diameter at breast height (DBH) of 11 to 90 cm using a Stihl 361 C BQ chainsaw and a conventional felling axe. The results showed that the proportion of productive time spent in axe-based operations (wedging and debarking the stump) was between 5 and 13% for spruce trees and between 2 and 7% for fir trees. The measured weighted HAV value (RMS VTV) for wedging was 6.99 m/s2 and 5.49 m/s2 for debarking the stump, which was 1.2 to 1.7 times higher than during chain-saw based operations. The contribution of the axe in the total HAV load was between 13% and 23% for spruce trees and between 6% and 18% for fir trees. The research results show that axe use contributes significantly to a feller's overall exposure to HAV, which means that the axe should be replaced by other tools or methods when felling, and research should be extended to different types of felling axes and alternatives.

Authors

Institutions

Publication Details

Journal
Croatian journal of forest engineering
Published
2026-11-17
DOI
https://doi.org/10.5552/crojfe.2027.4506
Primary Topic
Occupational Health and Safety in Workplaces
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Impact of using the axe in motor-manual felling on hand-arm vibrations

Anton Poje, Luka Pajek
Croatian journal of forest engineering
Occupational Health and Safety in Workplaces
article

Impact of using the axe in motor-manual felling on hand-arm vibrations

Anton Poje, Luka Pajek
article en

Abstract

Although the axe is the feller's main tool alongside the chainsaw, it has been neglected in previous studies from the point of view of occupational health and safety. The aim of the study was therefore to determine the share of axe use in the productive time of motor-manual felling and the contribution of the axe to the overall exposure of the feller to hand-arm vibration (HAV). The study was conducted during the felling of 43 spruce and fir trees with a diameter at breast height (DBH) of 11 to 90 cm using a Stihl 361 C BQ chainsaw and a conventional felling axe. The results showed that the proportion of productive time spent in axe-based operations (wedging and debarking the stump) was between 5 and 13% for spruce trees and between 2 and 7% for fir trees. The measured weighted HAV value (RMS VTV) for wedging was 6.99 m/s2 and 5.49 m/s2 for debarking the stump, which was 1.2 to 1.7 times higher than during chain-saw based operations. The contribution of the axe in the total HAV load was between 13% and 23% for spruce trees and between 6% and 18% for fir trees. The research results show that axe use contributes significantly to a feller's overall exposure to HAV, which means that the axe should be replaced by other tools or methods when felling, and research should be extended to different types of felling axes and alternatives.

Croatian journal of forest engineeringVol. 48(1)
University of Ljubljana (SI)
Good health and well-being
Occupational Health and Safety in Workplaces
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon