Comparative Evaluation of Rate-Independent and Rate-Dependent Cohesive-Zone Models for Low-Velocity Impact Damage in CFRP Laminates

Abstract This study compares a rate-independent cohesive-zone model with logarithmic, exponential, and power rate-dependent formulations for low-velocity impact of a fully clamped cross-ply carbonfibre-reinforced polymer laminate. Three-dimensional Abaqus/Explicit models combined a progressive intralaminar damage formulation with cohesive elements at seven ply interfaces. Predictions at 11.03 and 14.70 J were evaluated against published experimental force-time, forcedisplacement, absorbed-energy, and delamination data using global response metrics, ply-wise matrix damage, interface-wise delamination, and projected delamination morphology. At 11.03 J, the rate-independent model produced the lowest global mean absolute percentage error (MAPE; 5.05%), closely followed by the exponential model (5.57%). At 14.70 J, the exponential formulation was most accurate globally (2.41% MAPE), whereas the rate-independent formulation best predicted the projected delamination area under both conditions (+21.5% and -5.0%). The logarithmic formulation produced an unusually extensive matrix-damage field at 14.70 J despite moderate agreement in global metrics. Across the two conditions, the exponential model gave the lowest pooled global MAPE (3.99%), but no formulation was uniformly best for both global and local responses. Cohesive-model selection should therefore jointly consider structural response and local damage; conclusions about broader energy dependence require validation over a wider range of independently varied impact conditions.

Authors

Institutions

Publication Details

Journal
Materials Research Express
Published
2026-11-17
DOI
https://doi.org/10.1088/2053-1591/aec361
Primary Topic
Mechanical Behavior of Composites
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Comparative Evaluation of Rate-Independent and Rate-Dependent Cohesive-Zone Models for Low-Velocity Impact Damage in CFRP Laminates

Bo Cao, Chong Gao, Liang Yu, Xiaojun Tan et al.
1 links
Materials Research Express
Mechanical Behavior of Composites
article

Comparative Evaluation of Rate-Independent and Rate-Dependent Cohesive-Zone Models for Low-Velocity Impact Damage in CFRP Laminates

Bo Cao, Chong Gao, Liang Yu, Xiaojun Tan, MD ZOBAER ALI
article en

Abstract

Abstract This study compares a rate-independent cohesive-zone model with logarithmic, exponential, and power rate-dependent formulations for low-velocity impact of a fully clamped cross-ply carbonfibre-reinforced polymer laminate. Three-dimensional Abaqus/Explicit models combined a progressive intralaminar damage formulation with cohesive elements at seven ply interfaces. Predictions at 11.03 and 14.70 J were evaluated against published experimental force-time, forcedisplacement, absorbed-energy, and delamination data using global response metrics, ply-wise matrix damage, interface-wise delamination, and projected delamination morphology. At 11.03 J, the rate-independent model produced the lowest global mean absolute percentage error (MAPE; 5.05%), closely followed by the exponential model (5.57%). At 14.70 J, the exponential formulation was most accurate globally (2.41% MAPE), whereas the rate-independent formulation best predicted the projected delamination area under both conditions (+21.5% and -5.0%). The logarithmic formulation produced an unusually extensive matrix-damage field at 14.70 J despite moderate agreement in global metrics. Across the two conditions, the exponential model gave the lowest pooled global MAPE (3.99%), but no formulation was uniformly best for both global and local responses. Cohesive-model selection should therefore jointly consider structural response and local damage; conclusions about broader energy dependence require validation over a wider range of independently varied impact conditions.

Materials Research Express
Northwestern Polytechnical University (CN)
National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities
Mechanical Behavior of Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon