Dynamic Excess Free Energy Revealed from Larson–Miller Constant during Creep of Martensitic Steel

A creep parameter, dynamic excess free energy ∆Gex , is introduced directly from creep data without any adjustable parameters as 2.3RT times (the calculated Larson–Miller constant minus the experimentally obtained one), where R and T have usual meanings. ∆Gex is closely related to dynamic recovery and precipitation. Creep data for 8 kinds of steels of Grades 91, 92, and122 are classified into 257 groups and the ∆Gex s is calculated for each group. Correlations between ∆Gex and creep variables are thoroughly investigated. Among these the relationship between ∆Gex and the activation energy Q with the latter on the horizontal axis is characteristic and behaves like tracing an eighth rest backwards from the start of creep. During the first and second stages of the ∆Gex-Q relationship, precipitation along the boundaries of the hierarchical martensitic structure and the coarsening of precipitates and subgrains, respectively, occur dynamically, although the first stage is absent under high-temperature and long-term creep conditions. During the final stage leading to rupture, damages caused by nonequilibrium vacancies progressively accumulates and ∆Gex increases without exception. Both the hierarchical structure and the high dislocation density cause inhomogeneity in the martensitic steels and consequently result in a pronounced increase in the ∆Gex during creep. ∆Gex can be calculated nondestructively and, therefore, can be used to monitor microstructural changes during creep. Furthermore, the local minimum value of ∆Gex between the second and third stages is highly correlated with the estimated rupture strength at 600 ℃ for 1E5 h. Therefore, ∆Gex can be usefully applied to for the estimation of creep life or residual creep life.

Authors

Publication Details

Journal
Journal of Materials Science Research
Published
2026-11-17
DOI
https://doi.org/10.5539/jmsr.v15n2p35
Primary Topic
High Temperature Alloys and Creep
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Dynamic Excess Free Energy Revealed from Larson–Miller Constant during Creep of Martensitic Steel

Manabu Tamura
Journal of Materials Science Research
High Temperature Alloys and Creep
article

Dynamic Excess Free Energy Revealed from Larson–Miller Constant during Creep of Martensitic Steel

Manabu Tamura
article en

Abstract

A creep parameter, dynamic excess free energy ∆Gex , is introduced directly from creep data without any adjustable parameters as 2.3RT times (the calculated Larson–Miller constant minus the experimentally obtained one), where R and T have usual meanings. ∆Gex is closely related to dynamic recovery and precipitation. Creep data for 8 kinds of steels of Grades 91, 92, and122 are classified into 257 groups and the ∆Gex s is calculated for each group. Correlations between ∆Gex and creep variables are thoroughly investigated. Among these the relationship between ∆Gex and the activation energy Q with the latter on the horizontal axis is characteristic and behaves like tracing an eighth rest backwards from the start of creep. During the first and second stages of the ∆Gex-Q relationship, precipitation along the boundaries of the hierarchical martensitic structure and the coarsening of precipitates and subgrains, respectively, occur dynamically, although the first stage is absent under high-temperature and long-term creep conditions. During the final stage leading to rupture, damages caused by nonequilibrium vacancies progressively accumulates and ∆Gex increases without exception. Both the hierarchical structure and the high dislocation density cause inhomogeneity in the martensitic steels and consequently result in a pronounced increase in the ∆Gex during creep. ∆Gex can be calculated nondestructively and, therefore, can be used to monitor microstructural changes during creep. Furthermore, the local minimum value of ∆Gex between the second and third stages is highly correlated with the estimated rupture strength at 600 ℃ for 1E5 h. Therefore, ∆Gex can be usefully applied to for the estimation of creep life or residual creep life.

Journal of Materials Science ResearchVol. 15(2)
High Temperature Alloys and Creep
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon