Longitudinal Image-Based Monitoring of Abrasion-Induced Yarn Diameter Changes Under Different Sizing Conditions

Conventional yarn abrasion testing determines the number of abrasion cycles to break but does not reveal the changes in yarn geometry that occur before failure. The aim of this study was to apply and evaluate a longitudinal image-based method for monitoring changes in yarn-body diameter during progressive abrasion. Eight yarns differing in linear density and construction were investigated in untreated, conventionally sized, and pre-wetted sizing conditions. Abrasion resistance was determined using a Zweigle G551 abrasion tester, with 20 specimens tested per yarn–treatment combination. Five of these specimens were monitored longitudinally by digital microscopy at predefined abrasion intervals until breakage or the final observation. Yarn diameter was determined using Fiji (ImageJ) and the Ridge Detection plugin. A supplementary methodological evaluation showed maximum deviations of 0.40–1.22% in a parameter-sensitivity assessment and differences of −1.35% to +2.50% between automated and manual measurements on representative images. Conventional sizing yielded the highest geometric mean cycles to break for all eight yarns, although statistically significant treatment effects were detected for six yarns. Longitudinal diameter changes varied among specimens and abrasion stages, with some yarns showing an initial decrease followed by stabilization or an increase. The results demonstrate the potential of repeated image-based measurements to complement conventional abrasion testing by characterizing changes in yarn geometry before failure. Further validation of image registration and measurement repeatability is required.

Authors

Institutions

Publication Details

Journal
Textiles
Published
2026-11-17
DOI
https://doi.org/10.3390/textiles6040142
Primary Topic
Textile materials and evaluations
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Longitudinal Image-Based Monitoring of Abrasion-Induced Yarn Diameter Changes Under Different Sizing Conditions

Ivana Gudlin Schwarz, Ana Kalazić
Textiles
Textile materials and evaluations
article

Longitudinal Image-Based Monitoring of Abrasion-Induced Yarn Diameter Changes Under Different Sizing Conditions

Ivana Gudlin Schwarz, Ana Kalazić
article en

Abstract

Conventional yarn abrasion testing determines the number of abrasion cycles to break but does not reveal the changes in yarn geometry that occur before failure. The aim of this study was to apply and evaluate a longitudinal image-based method for monitoring changes in yarn-body diameter during progressive abrasion. Eight yarns differing in linear density and construction were investigated in untreated, conventionally sized, and pre-wetted sizing conditions. Abrasion resistance was determined using a Zweigle G551 abrasion tester, with 20 specimens tested per yarn–treatment combination. Five of these specimens were monitored longitudinally by digital microscopy at predefined abrasion intervals until breakage or the final observation. Yarn diameter was determined using Fiji (ImageJ) and the Ridge Detection plugin. A supplementary methodological evaluation showed maximum deviations of 0.40–1.22% in a parameter-sensitivity assessment and differences of −1.35% to +2.50% between automated and manual measurements on representative images. Conventional sizing yielded the highest geometric mean cycles to break for all eight yarns, although statistically significant treatment effects were detected for six yarns. Longitudinal diameter changes varied among specimens and abrasion stages, with some yarns showing an initial decrease followed by stabilization or an increase. The results demonstrate the potential of repeated image-based measurements to complement conventional abrasion testing by characterizing changes in yarn geometry before failure. Further validation of image registration and measurement repeatability is required.

TextilesVol. 6(4)
University of Zagreb (HR)
European Commission
Textile materials and evaluations
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon