A Small-Scale High-Temperature Furnace for Gas-Atomization of Novel Reduced-Activation Copper Alloys

A compact, high-temperature tube furnace capable of 1 800°C continuous operation was designed for novel alloy development and integrated within a small-scale gas atomizer. Off-the-shelf components minimized machining and enabled construction for less than ~$8 000. A hollow carbon arc gouging electrode acting as the furnace tube was heated by an axial current flow. Reaction rates between the carbon tube body and the Cu-Ti, Cr alloys occurr at much longer timescales than the 6-min alloy melt time, mitigating reactions with metal alloys.Water-cooled end-cap electrodes on opposing ends of a 2.75-deg ConFlat cross and forced air cool the furnace envelope. PAN (polyacrylonitrile) graphite felt insulation within the furnace envelope reduced radiative heat loss, while an argon gas purge preventeds oxidation. The low-cost carbon tube enabled replacement between runs to eliminate material cross contamination.A PID (proportional-integral-derivative) feedback control stabilized the carbon tube temperature, which was measured by a two-color pyrometer within a steady-state error of <0.5°C and achieved a rise time to 1 800°C of under 20 s. Intermittent operation at 2 360°C with 1 810 W of heating power was limited by the degradation of the Viton O-rings and the pyrometer measurement range.Axial thermocouple measurements indicated an 80-mm-long section of uniform temperature. A pulsed argon feed ejected the molten alloy melt from the furnace into the associated gas atomizer. Scanning electron microscopy/energy dispersive Xr-ay analyses of the powders from test melts indicated a consistent distribution of the solute elements within the individual gas-atomized powder particles for the Cu-V-Ta, Cu-Cr-Ti, and Cu-Cr-Ta alloys produced at 1 800°C for 6 min.

Authors

Institutions

Publication Details

Journal
Fusion Science & Technology
Published
2026-11-17
DOI
https://doi.org/10.1080/15361055.2026.2761230
Primary Topic
Fusion materials and technologies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

A Small-Scale High-Temperature Furnace for Gas-Atomization of Novel Reduced-Activation Copper Alloys

Andrew H Seltzman, Mariabelle Azemar
Fusion Science & Technology
Fusion materials and technologies
article

A Small-Scale High-Temperature Furnace for Gas-Atomization of Novel Reduced-Activation Copper Alloys

Andrew H Seltzman, Mariabelle Azemar
article en

Abstract

A compact, high-temperature tube furnace capable of 1 800°C continuous operation was designed for novel alloy development and integrated within a small-scale gas atomizer. Off-the-shelf components minimized machining and enabled construction for less than ~$8 000. A hollow carbon arc gouging electrode acting as the furnace tube was heated by an axial current flow. Reaction rates between the carbon tube body and the Cu-Ti, Cr alloys occurr at much longer timescales than the 6-min alloy melt time, mitigating reactions with metal alloys.Water-cooled end-cap electrodes on opposing ends of a 2.75-deg ConFlat cross and forced air cool the furnace envelope. PAN (polyacrylonitrile) graphite felt insulation within the furnace envelope reduced radiative heat loss, while an argon gas purge preventeds oxidation. The low-cost carbon tube enabled replacement between runs to eliminate material cross contamination.A PID (proportional-integral-derivative) feedback control stabilized the carbon tube temperature, which was measured by a two-color pyrometer within a steady-state error of <0.5°C and achieved a rise time to 1 800°C of under 20 s. Intermittent operation at 2 360°C with 1 810 W of heating power was limited by the degradation of the Viton O-rings and the pyrometer measurement range.Axial thermocouple measurements indicated an 80-mm-long section of uniform temperature. A pulsed argon feed ejected the molten alloy melt from the furnace into the associated gas atomizer. Scanning electron microscopy/energy dispersive Xr-ay analyses of the powders from test melts indicated a consistent distribution of the solute elements within the individual gas-atomized powder particles for the Cu-V-Ta, Cu-Cr-Ti, and Cu-Cr-Ta alloys produced at 1 800°C for 6 min.

Fusion Science & Technology
Massachusetts Institute of Technology (US)
U.S. Department of Energy
Fusion materials and technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon