I-System’s stability indicators for underground and surface openings in challenging conditions

Introduction: This article presents the outcome of a research project that developed equations for quantifying stability indicators for designers, engineers, and geologists working on underground and surface structures such as tunnels and slopes. The research is conducted as part of the Udhampur–Srinagar–Baramulla Rail Link (USBRL) project in the state of Jammu and Kashmir in India between 2018 and 2024. The developed equations include arch-action time, active span, slip-action time, size of plastic zone, deformation limits, and support system stress, which are related to the Index of Ground-Structure (I-System). The research sought to enhance the I-System’s comprehensiveness and address the gap between classification, characterisation, and stability assessments to facilitate ground–structure interaction evaluation, ground behaviour identification, and associated hazard and risk diagnosis. This will also synchronise geological, geotechnical, and geomechanical assessments between the project design and execution teams, eliminating judgement dispersion, and unifying generation of a mitigation measure as an appropriate response to ground behaviour and safety assurance. Materials and methods: To relate the stability indicators to the I-System, I-Value was selected as the primary parameter for measurement. Logical parameters were then chosen as stability indicators and related to the I-Value and other geometrical parameters. Data was collected between 2018 and 2024 during the execution of the elements of the USBRL project including tunnels T01, T05, T13, and T14 with an overall length of 46 km. The correlations between I-Value and stability parameters proposed in this paper are based on empirical and experimental principles. The research was fed by extensive experience, which contributed to generally dependable final outcome. Analytical and numerical verification is not conducted due to limitations involved with these two methods. Results: The data pairs resulting from the surveyed, collected, and experimented data during the project’s advancement and stability indicators as dependent variables produced consistent linear and non-linear regression outputs with acceptable predicted values. This reliability was proven during the excavation. Conclusions: The outcome of the research has been successfully used in the design and construction of the tunnel projects in the USBRL in the highly challenging conditions of the Lesser Himalayas. The study is conducted in rock and soil medium with highly complex geological formations and tectonised conditions; the stability indicators proposed here may also be applicable to similar conditions, though there is scope for further research to enhance the outcomes of this study.

Authors

Publication Details

Journal
Academia Engineering
Published
2026-11-17
DOI
https://doi.org/10.20935/acadeng8642
Primary Topic
Geotechnical Engineering and Analysis
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

I-System’s stability indicators for underground and surface openings in challenging conditions

H. Bineshian
2 links
Academia Engineering
Geotechnical Engineering and Analysis
article

I-System’s stability indicators for underground and surface openings in challenging conditions

H. Bineshian
article en

Abstract

Introduction: This article presents the outcome of a research project that developed equations for quantifying stability indicators for designers, engineers, and geologists working on underground and surface structures such as tunnels and slopes. The research is conducted as part of the Udhampur–Srinagar–Baramulla Rail Link (USBRL) project in the state of Jammu and Kashmir in India between 2018 and 2024. The developed equations include arch-action time, active span, slip-action time, size of plastic zone, deformation limits, and support system stress, which are related to the Index of Ground-Structure (I-System). The research sought to enhance the I-System’s comprehensiveness and address the gap between classification, characterisation, and stability assessments to facilitate ground–structure interaction evaluation, ground behaviour identification, and associated hazard and risk diagnosis. This will also synchronise geological, geotechnical, and geomechanical assessments between the project design and execution teams, eliminating judgement dispersion, and unifying generation of a mitigation measure as an appropriate response to ground behaviour and safety assurance. Materials and methods: To relate the stability indicators to the I-System, I-Value was selected as the primary parameter for measurement. Logical parameters were then chosen as stability indicators and related to the I-Value and other geometrical parameters. Data was collected between 2018 and 2024 during the execution of the elements of the USBRL project including tunnels T01, T05, T13, and T14 with an overall length of 46 km. The correlations between I-Value and stability parameters proposed in this paper are based on empirical and experimental principles. The research was fed by extensive experience, which contributed to generally dependable final outcome. Analytical and numerical verification is not conducted due to limitations involved with these two methods. Results: The data pairs resulting from the surveyed, collected, and experimented data during the project’s advancement and stability indicators as dependent variables produced consistent linear and non-linear regression outputs with acceptable predicted values. This reliability was proven during the excavation. Conclusions: The outcome of the research has been successfully used in the design and construction of the tunnel projects in the USBRL in the highly challenging conditions of the Lesser Himalayas. The study is conducted in rock and soil medium with highly complex geological formations and tectonised conditions; the stability indicators proposed here may also be applicable to similar conditions, though there is scope for further research to enhance the outcomes of this study.

Academia EngineeringVol. 3(4)
Industry, innovation and infrastructure
Geotechnical Engineering and Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon