Environmental and Anticorrosive Performance of Low-Zinc Epoxy Powder Coating Primer

In this study, the effect of reducing zinc content and incorporating carbon nanotubes on the surface, mechanical, and corrosion properties, as well as the environmental impact, of epoxy powder coatings was investigated. A series of coatings with progressively decreasing zinc content and increasing carbon nanotube content was produced using a conventional powder coating manufacturing process, with BaSO4 used to compensate for the reduction in zinc content. The results revealed systematic changes in coating properties depending on their composition. The melt viscosity at 160 °C decreased from 7.21 to 1.54 Pa·s, while surface roughness increased and gloss decreased as the zinc content was reduced. An increase in the water contact angle was also observed, indicating enhanced surface hydrophobicity. Furthermore, surface resistivity decreased from 1.08 × 103 to 0.16 × 103 Ω, indicating improved electrical conductivity of the coating surfaces. As the zinc content decreased, the amount of zinc released into the artificial seawater solution also decreased. Among the compositions investigated, the coating containing 20% zinc and 0.75% single-walled carbon nanotubes (SWCNTs) represented a promising compromise, maintaining corrosion resistance and mechanical properties comparable to those of coatings with higher zinc contents. Further reductions in zinc content resulted in decreased corrosion resistance when the conventional dispersion method was used. The results indicate that incorporating carbon nanotubes is a promising approach to partially replacing zinc in protective powder coatings while simultaneously reducing zinc release into aquatic environments. However, optimizing the nanotube dispersion method to enable greater reductions in zinc content without compromising coating properties may increase production costs.

Authors

Institutions

Publication Details

Journal
Molecules
Published
2026-11-17
DOI
https://doi.org/10.3390/molecules31224165
Primary Topic
Corrosion Behavior and Inhibition
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Environmental and Anticorrosive Performance of Low-Zinc Epoxy Powder Coating Primer

Łukasz Florczak, Barbara Pilch‐Pitera, Daniel Swoboda, Francesco Bellucco et al.
3 links
Molecules
Corrosion Behavior and Inhibition
article

Environmental and Anticorrosive Performance of Low-Zinc Epoxy Powder Coating Primer

Łukasz Florczak, Barbara Pilch‐Pitera, Daniel Swoboda, Francesco Bellucco, Elwira Węgrzyniak-Kściuczyk, Małgorzata Żychowicz
article en

Abstract

In this study, the effect of reducing zinc content and incorporating carbon nanotubes on the surface, mechanical, and corrosion properties, as well as the environmental impact, of epoxy powder coatings was investigated. A series of coatings with progressively decreasing zinc content and increasing carbon nanotube content was produced using a conventional powder coating manufacturing process, with BaSO4 used to compensate for the reduction in zinc content. The results revealed systematic changes in coating properties depending on their composition. The melt viscosity at 160 °C decreased from 7.21 to 1.54 Pa·s, while surface roughness increased and gloss decreased as the zinc content was reduced. An increase in the water contact angle was also observed, indicating enhanced surface hydrophobicity. Furthermore, surface resistivity decreased from 1.08 × 103 to 0.16 × 103 Ω, indicating improved electrical conductivity of the coating surfaces. As the zinc content decreased, the amount of zinc released into the artificial seawater solution also decreased. Among the compositions investigated, the coating containing 20% zinc and 0.75% single-walled carbon nanotubes (SWCNTs) represented a promising compromise, maintaining corrosion resistance and mechanical properties comparable to those of coatings with higher zinc contents. Further reductions in zinc content resulted in decreased corrosion resistance when the conventional dispersion method was used. The results indicate that incorporating carbon nanotubes is a promising approach to partially replacing zinc in protective powder coatings while simultaneously reducing zinc release into aquatic environments. However, optimizing the nanotube dispersion method to enable greater reductions in zinc content without compromising coating properties may increase production costs.

MoleculesVol. 31(22)
Rzeszów University of Technology (PL)
Narodowe Centrum Badań i Rozwoju
Responsible consumption and production
Corrosion Behavior and Inhibition
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon