Design, modeling, and decoupled control of a fully-actuated pentacopter UAV with a central 2-DoF gimbaled thruster
Recent advancements in Unmanned Aerial Vehicles (UAVs) demand higher maneuverability and stability in complex missions. However, traditional quadcopters, due to their under-actuated nature, suffer from strong coupling between translational and rotational degrees of freedom, which limits independent trajectory tracking and degrades performance in aggressive maneuvers. To address these limitations, this paper introduces a novel fully-actuated architecture termed the Center-Gimbal Pentacopter, in which a centrally mounted rotor on a 2-DoF gimbal augments a conventional four-rotor layout. The resulting actuator redundancy enables the generation of independent forces and torques, effectively mitigating the drawbacks of under-actuated systems. By employing a baseline hierarchical cascaded PID control framework, this study demonstrates that the the proposed mechanical architecture together with the cascaded controller achieves effectively decoupled translational and rotational dynamics in the reported simulations, facilitating independent control of the degrees of freedom without requiring complex control algorithms. The inner loop stabilizes roll, pitch, and yaw, while the outer loop regulates position, thereby separating attitude and position dynamics and facilitating independent control of the degrees of freedom. The proposed architecture and control scheme are evaluated through comprehensive numerical simulations and compared against a conventional quadcopter under identical reference trajectories. Results demonstrate that the Center-Gimbal Pentacopter significantly enhances trajectory tracking performance and improves overall stability. Quantitative analysis shows that the Root Mean Square Error (RMSE) in altitude control is reduced by up to 40% compared with traditional platforms, while maintaining a nearly level attitude during horizontal motion. These findings highlight the high potential of the proposed system for executing highly precise and complex spatial maneuvers in advanced aerial missions.
Authors
- Seyed Hossein Sadati (ORCID: https://orcid.org/0000-0002-1250-4607)
- Pedram Kabiri (ORCID: https://orcid.org/0009-0005-2188-8955)
Institutions
- K. N. Toosi University of Technology (IR)
Publication Details
- Journal
- Scientific Reports
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1038/s41598-026-79213-7
- Primary Topic
- Adaptive Control of Nonlinear Systems
- Type
- article
- Field-Weighted Citation Impact
- 0.00