Dew-point tracking with multi-objective FOPID control for energy-efficient peltier-based condensation

Abstract This paper presents an experimental case study of thermoelectric (Peltier) cooling in which the control reference is the dew point, computed in real time from ambient temperature and relative humidity, and the controller is a finite-memory discrete fractional-order PID (FOPID) tuned by multi-objective optimization. The FOPID parameters were selected from an NSGA-II Pareto front that trades off tracking error, electrical energy and control-signal variation. The resulting controller (OPT-FOPID) was compared on the same embedded platform with a PID and with a FOPID tuned by particle swarm optimization (PSO-FOPID), in five 300 s repetitions per controller, run in randomized order with a single firmware and calibration. The three controllers reached the dew point in 6–7 s and held it with an error dispersion of 0.03–0.04 $$^\circ $$ C; no statistically significant difference was detected among them in tracking error, settling time or energy per degree of cooling demand. The OPT-FOPID reduced the total variation of the PWM signal by 35–38% with respect to both baselines ( $$p<0.001$$ ), while the differences in peak electrical power were small (5–12%). In simulation, a multi-objective PID tuned with the same procedure reached a comparable trade-off, so the smoother actuation is attributed to the multi-objective tuning rather than to the fractional orders. A two-node physical model of the module, identified from a characterization test ( $$\varvec{R^2=0.992}$$ ) and validated on independent trials, gives a model-based coefficient of performance of about 0.1. On this platform, the multi-objective design smoothed the actuation without a detectable loss of tracking accuracy, but did not reduce the energy consumption.

Authors

Institutions

Publication Details

Journal
Heat and Mass Transfer
Published
2026-11-17
DOI
https://doi.org/10.1007/s00231-026-03817-y
Primary Topic
Advanced Control Systems Design
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Dew-point tracking with multi-objective FOPID control for energy-efficient peltier-based condensation

Alejandro Ramos Martín, FEDERICO LEON ZERPA, Carlos Jesús Sánchez-Morales, Miguel F. Ferrer Pareja
2 links
Heat and Mass Transfer
Advanced Control Systems Design
article

Dew-point tracking with multi-objective FOPID control for energy-efficient peltier-based condensation

Alejandro Ramos Martín, FEDERICO LEON ZERPA, Carlos Jesús Sánchez-Morales, Miguel F. Ferrer Pareja
article en

Abstract

Abstract This paper presents an experimental case study of thermoelectric (Peltier) cooling in which the control reference is the dew point, computed in real time from ambient temperature and relative humidity, and the controller is a finite-memory discrete fractional-order PID (FOPID) tuned by multi-objective optimization. The FOPID parameters were selected from an NSGA-II Pareto front that trades off tracking error, electrical energy and control-signal variation. The resulting controller (OPT-FOPID) was compared on the same embedded platform with a PID and with a FOPID tuned by particle swarm optimization (PSO-FOPID), in five 300 s repetitions per controller, run in randomized order with a single firmware and calibration. The three controllers reached the dew point in 6–7 s and held it with an error dispersion of 0.03–0.04 $$^\circ $$ C; no statistically significant difference was detected among them in tracking error, settling time or energy per degree of cooling demand. The OPT-FOPID reduced the total variation of the PWM signal by 35–38% with respect to both baselines ( $$p<0.001$$ ), while the differences in peak electrical power were small (5–12%). In simulation, a multi-objective PID tuned with the same procedure reached a comparable trade-off, so the smoother actuation is attributed to the multi-objective tuning rather than to the fractional orders. A two-node physical model of the module, identified from a characterization test ( $$\varvec{R^2=0.992}$$ ) and validated on independent trials, gives a model-based coefficient of performance of about 0.1. On this platform, the multi-objective design smoothed the actuation without a detectable loss of tracking accuracy, but did not reduce the energy consumption.

Heat and Mass TransferVol. 62(12)
Universidad de Las Palmas de Gran Canaria (ES)
Affordable and clean energy
Advanced Control Systems Design
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon