Galvanic Corrosion between Copper and Carbon Steel in Different Bentonite Slurry Phases: Supernatant and Sediment
Galvanic current density (ig) between carbon steel (CS) and Cu (with a Cu/CS area ratio of 10:1) was measured to be 3.63, 6.50, and 0.39 μA cm−2 in simulated Beishan groundwater, the supernatant and the sediment layer of bentonite slurries, respectively. Three predominant corrosion product phases, lepidocrocite (γ-FeOOH), hematite (α-Fe2O3), and magnetite (Fe3O4), were identified by Raman spectroscopy across all exposure environments. The spatial distribution of anodic and cathodic currents was analyzed on wire beam electrodes (WBE) comprising Cu and CS microelectrodes after 48 h of exposure to the above environments. Localized cathodic activity occurred on Cu microelectrodes adjacent to CS electrodes on WBEs, a behavior observed consistently in simulated groundwater and the bentonite slurry supernatant. In the sediment layer, self-corrosion predominates on the Cu surface, as evidenced by the negligible current responses observed on a substantial number of Cu microelectrodes.
Authors
- Shuo Zhang (ORCID: https://orcid.org/0000-0001-8336-9214)
- Ziang Su (ORCID: https://orcid.org/0009-0006-4248-2812)
- Xiangju Liu
- Nazhen Liu
Institutions
- Qilu University of Technology (CN)
- Chinese Academy of Sciences (CN)
- Institute of Oceanology (CN)
- University of Chinese Academy of Sciences (CN)
- Qilu Institute of Technology (CN)
- State Key Laboratory of Advanced Marine Materials (CN)
Publication Details
- Journal
- Canadian Journal of Chemistry
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1139/cjc-2026-0170
- Primary Topic
- Corrosion Behavior and Inhibition
- Type
- article
- Field-Weighted Citation Impact
- 0.00