Control of heavy metals during the co‐pyrolysis of agricultura/forestry waste with coastal municipal sludge and the adsorption characteristics of recovered modified co‐pyrolytic char toward benzene series VOCs : Combined experimental and simulation s

Abstract Clean recovery and reuse of solid waste through co‐pyrolysis is important to social development. Co‐pyrolysis of coastal raw municipal sludge (RS) with three types of agricultural/forestry waste revealed that co‐pyrolysis of RS with pine sawdust was the best, with the optimal co‐pyrolysis temperature, time and mixing ratio being 850°C, 90 min and 50%, respectively. To further mitigate potential heavy metal contamination, modified sepiolites were synthesized, among which acid/thermally activated sepiolite (TH‐SP) demonstrated superior control. The addition of TH‐SP increased the absolute solid‐phase retention rates of five targeted heavy metals by 22.15% to 42.89%, successfully classifying all heavy metals as low‐risk. Consequently, 90% of Cr, Cu, and Pb were converted into relatively stable forms, while the stable proportions of Zn and Cd increased by 10%. Overall, Zn exhibited the highest concentration and Cd posed the greatest potential risk, with solid‐phase enrichment following the order of Cr > Zn > Cu/Pb > Cd, and Cu accounting for the largest stable proportion. Furthermore, the adsorption of VOCs by the modified co‐pyrolysis char fitted well with pseudo‐first‐order/Elovich kinetics and Langmuir–Freundlich thermodynamic models. The H‐BC‐N2 exhibited the best adsorption performance for breakthrough time and adsorption volume, and the adsorption capacity remained at 70% even after six cycles, with physisorption dominating the adsorption process. Simulations of adsorption distance, adsorption energy, and frontier molecular orbitals demonstrated strong heavy metal binding onto TH‐SP and excellent VOC adsorption on the modified char. The simulation findings aligned closely with experimental results, confirming the reliability and mechanisms of this process.

Authors

Institutions

Publication Details

Journal
Environmental Progress & Sustainable Energy
Published
2026-11-16
DOI
https://doi.org/10.1002/ep.70782
Primary Topic
Thermochemical Biomass Conversion Processes
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Control of heavy metals during the co‐pyrolysis of agricultura/forestry waste with coastal municipal sludge and the adsorption characteristics of recovered modified co‐pyrolytic char toward benzene series VOCs : Combined experimental and simulation s

Zhengdong Han, Pengkun Ren, Zhaoping Zhong, Qi Xiong et al.
Environmental Progress & Sustainable Energy
Thermochemical Biomass Conversion Processes
article

Control of heavy metals during the co‐pyrolysis of agricultura/forestry waste with coastal municipal sludge and the adsorption characteristics of recovered modified co‐pyrolytic char toward benzene series VOCs : Combined experimental and simulation s

Zhengdong Han, Pengkun Ren, Zhaoping Zhong, Qi Xiong, Jiangnan Ye, Shuze Wang, Yuxuan Yang, Xiaoni Zhang, Shengyong Lu, Weijun Lin
article en

Abstract

Abstract Clean recovery and reuse of solid waste through co‐pyrolysis is important to social development. Co‐pyrolysis of coastal raw municipal sludge (RS) with three types of agricultural/forestry waste revealed that co‐pyrolysis of RS with pine sawdust was the best, with the optimal co‐pyrolysis temperature, time and mixing ratio being 850°C, 90 min and 50%, respectively. To further mitigate potential heavy metal contamination, modified sepiolites were synthesized, among which acid/thermally activated sepiolite (TH‐SP) demonstrated superior control. The addition of TH‐SP increased the absolute solid‐phase retention rates of five targeted heavy metals by 22.15% to 42.89%, successfully classifying all heavy metals as low‐risk. Consequently, 90% of Cr, Cu, and Pb were converted into relatively stable forms, while the stable proportions of Zn and Cd increased by 10%. Overall, Zn exhibited the highest concentration and Cd posed the greatest potential risk, with solid‐phase enrichment following the order of Cr > Zn > Cu/Pb > Cd, and Cu accounting for the largest stable proportion. Furthermore, the adsorption of VOCs by the modified co‐pyrolysis char fitted well with pseudo‐first‐order/Elovich kinetics and Langmuir–Freundlich thermodynamic models. The H‐BC‐N2 exhibited the best adsorption performance for breakthrough time and adsorption volume, and the adsorption capacity remained at 70% even after six cycles, with physisorption dominating the adsorption process. Simulations of adsorption distance, adsorption energy, and frontier molecular orbitals demonstrated strong heavy metal binding onto TH‐SP and excellent VOC adsorption on the modified char. The simulation findings aligned closely with experimental results, confirming the reliability and mechanisms of this process.

Environmental Progress & Sustainable Energy
Henan Energy & Chemical Industry Group (China) (CN), State Key Laboratory of Clean Energy Utilization (CN), Zhejiang University (CN), Southeast University (CN), Taizhou University (CN)
Thermochemical Biomass Conversion Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon