Mechanical, wear and microstructural investigation of the structure-property relationship of Kevlar 29 fiber reinforced polymer composites for structural and protective applications

In recent times, more attentions have been given to biodegradable reinforcement materials where modifications are necessary before incorporation or during production which serves as drawback in some respect. Besides, some areas of applications up till now really solely or partially on the use of synthetic based reinforcement materials. Hence, this research used Kevlar 29 fiber as a reinforcing constituent in epoxy matrix composites for demanding structural and protective applications. The study bridged a critical knowledge gap regarding how composite performance evolves across a wide range of fiber loading, particularly, across the transition from effective reinforcement to property-specific behaviour by developing Kevlar 29 fiber reinforced epoxy composites across a loading range of 3–18 wt%. Stir casting and open mould techniques were used in the production of the samples followed by testing in accordance with standards after curing. Mechanical and wear properties were examined followed by characterization of the fractured surfaces. The results showed that the optimum fiber content depends on the property and the loading mode. Bending strength and modulus peaked at 6 wt% with a value of 52.77 MPa and 2.38 GPa culminating to 73% and 25% enhancements, respectively. Sample with 18 wt% was the best in Young's modulus with a value of 1.75 GPa (106% enhancement), elongation at break was 13.0% (261.11% enhancement) and impact strength of 0.811 J/mm² (61.6% enhancement) while hardness and wear resistance were optima at 3 wt% with a value of 65.36 HS and the wear index of 0.025. The results revealed a transition property from brittle to ductile tendencies as the reinforcement content increases. While high hardness and wear resistance was observed at 3 wt%, moderate values were noticed within 6–12 wt% and high strength and ductility was obtained within 15–18 wt%. Hence, it was discovered that, optimal mechanical and tribological performance is loading mode dependent. Scanning electron microscopy, energy dispersive X-ray spectroscopy, and Raman spectroscopy provided complementary morphological, elemental, and spectroscopic evidence of the interfacial and structural characteristics of the composite. The observed property-specific performance trends established a structure-property relationship framework that provides experimentally grounded guidance for the design of lightweight Kevlar 29/epoxy composites for structural and protective applications.

Authors

Institutions

Publication Details

Journal
Next Materials
Published
2026-11-17
DOI
https://doi.org/10.1016/j.nxmate.2026.104003
Primary Topic
Fiber-reinforced polymer composites
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Mechanical, wear and microstructural investigation of the structure-property relationship of Kevlar 29 fiber reinforced polymer composites for structural and protective applications

Isiaka Oluwole Oladele, Oluyemi Ojo Daramola, Fatai Olufemi Aramide, Maryam Mohammadi et al.
1 links
Next Materials
Fiber-reinforced polymer composites
article

Mechanical, wear and microstructural investigation of the structure-property relationship of Kevlar 29 fiber reinforced polymer composites for structural and protective applications

Isiaka Oluwole Oladele, Oluyemi Ojo Daramola, Fatai Olufemi Aramide, Maryam Mohammadi, Bayode Benson Adeyanju, Benjamin Omotayo Adewuyi, Miracle Adeyeni Ajayi, Max C. Lemme, Martin Otto
article en

Abstract

In recent times, more attentions have been given to biodegradable reinforcement materials where modifications are necessary before incorporation or during production which serves as drawback in some respect. Besides, some areas of applications up till now really solely or partially on the use of synthetic based reinforcement materials. Hence, this research used Kevlar 29 fiber as a reinforcing constituent in epoxy matrix composites for demanding structural and protective applications. The study bridged a critical knowledge gap regarding how composite performance evolves across a wide range of fiber loading, particularly, across the transition from effective reinforcement to property-specific behaviour by developing Kevlar 29 fiber reinforced epoxy composites across a loading range of 3–18 wt%. Stir casting and open mould techniques were used in the production of the samples followed by testing in accordance with standards after curing. Mechanical and wear properties were examined followed by characterization of the fractured surfaces. The results showed that the optimum fiber content depends on the property and the loading mode. Bending strength and modulus peaked at 6 wt% with a value of 52.77 MPa and 2.38 GPa culminating to 73% and 25% enhancements, respectively. Sample with 18 wt% was the best in Young's modulus with a value of 1.75 GPa (106% enhancement), elongation at break was 13.0% (261.11% enhancement) and impact strength of 0.811 J/mm² (61.6% enhancement) while hardness and wear resistance were optima at 3 wt% with a value of 65.36 HS and the wear index of 0.025. The results revealed a transition property from brittle to ductile tendencies as the reinforcement content increases. While high hardness and wear resistance was observed at 3 wt%, moderate values were noticed within 6–12 wt% and high strength and ductility was obtained within 15–18 wt%. Hence, it was discovered that, optimal mechanical and tribological performance is loading mode dependent. Scanning electron microscopy, energy dispersive X-ray spectroscopy, and Raman spectroscopy provided complementary morphological, elemental, and spectroscopic evidence of the interfacial and structural characteristics of the composite. The observed property-specific performance trends established a structure-property relationship framework that provides experimentally grounded guidance for the design of lightweight Kevlar 29/epoxy composites for structural and protective applications.

Next MaterialsVol. 14
Tshwane University of Technology (ZA), Federal University of Technology (NG), AMO (Germany) (DE), Ondo State Primary Health Care Development Board (NG), Development Research and Projects Centre (NG), RWTH Aachen University (DE)
Deutscher Akademischer Austauschdienst
Fiber-reinforced polymer composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon