Energy Levels of PTB7-Th and ITIC with a Cathode Interface Layer in Organic Photovoltaics

Abstract An alcohol-soluble naphthalene diimide (NDI)-thiophene-based polymer poly[(N,N′-bis(3-(N,N-dimethyl-N-ethylammonium)propyl)naphthalene-1,4,5,8-bis(dicarboximide)–2,6-diyl)-alt-(2,7-(9,9′-dihexylfluorene))]dibromide P(NDI3N-F8-Br) was studied as a cathode interface layer (CIL) in organic photovoltaics. P(NDI3N-F8-Br) was found to show good solubility in green solvents, such as water and alcohol, and effectively reduce the work function of the electrodes, which are desirable properties for functioning as a CIL. The respective interfaces between the donor polymer poly[(4,8-di(5-ethylhexylthienyl)benzo[1,2-b:3,3-b]dithiophene–2,6–diyl)-alt-(3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl)] (PTB7-Th) and the nonfullerene acceptor, 9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))–5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2′,3′-d′]-s-indaceno[1,2-b:5,6-b′]-dithiophene (ITIC), with the P(NDI3N-F8-Br) CIL have been investigated using photoelectron spectroscopy. The results from spectroscopic investigation revealed that P(NDI3N-F8-Br) functions as a layer blocking the hole transport into the active layer, which is its desirable function. The relatively high lowest unoccupied molecular orbital level of P(NDI3N-F8-Br) introduces an energetic barrier for direct electron transport; however, owing to the ultrathin nature of the interlayer and the formation of favorable interfacial energetics, efficient electron extraction can still occur. Further, energy shifts of the components of PTB7-Th and ITIC have been probed with X-ray photoelectron spectroscopy after changing the thicknesses of the layers, which indicates that two dipoles were formed at the interfaces of active layers and P(NDI3N-F8-Br). The first dipole was formed at the interfaces of active layers/P(NDI3N-F8-Br), whereas an opposite polarity dipole was formed after increasing the layer thickness and created at the bulk rather than at the interface. This study highlights the importance of understanding the energy levels, which is a significant factor in designing a device.

Authors

Institutions

Publication Details

Journal
ACS Applied Electronic Materials
Published
2026-11-17
DOI
https://doi.org/10.1021/acsaelm.6c00893
Primary Topic
Organic Electronics and Photovoltaics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Energy Levels of PTB7-Th and ITIC with a Cathode Interface Layer in Organic Photovoltaics

Gunther G. Andersson, Jonas M. Bjuggren, Mats R. Andersson, Amira R. M. Alghamdi et al.
ACS Applied Electronic Materials
Organic Electronics and Photovoltaics
article

Energy Levels of PTB7-Th and ITIC with a Cathode Interface Layer in Organic Photovoltaics

Gunther G. Andersson, Jonas M. Bjuggren, Mats R. Andersson, Amira R. M. Alghamdi, Bradley Peter Kirk, Yanting Yin
article en

Abstract

Abstract An alcohol-soluble naphthalene diimide (NDI)-thiophene-based polymer poly[(N,N′-bis(3-(N,N-dimethyl-N-ethylammonium)propyl)naphthalene-1,4,5,8-bis(dicarboximide)–2,6-diyl)-alt-(2,7-(9,9′-dihexylfluorene))]dibromide P(NDI3N-F8-Br) was studied as a cathode interface layer (CIL) in organic photovoltaics. P(NDI3N-F8-Br) was found to show good solubility in green solvents, such as water and alcohol, and effectively reduce the work function of the electrodes, which are desirable properties for functioning as a CIL. The respective interfaces between the donor polymer poly[(4,8-di(5-ethylhexylthienyl)benzo[1,2-b:3,3-b]dithiophene–2,6–diyl)-alt-(3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl)] (PTB7-Th) and the nonfullerene acceptor, 9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))–5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2′,3′-d′]-s-indaceno[1,2-b:5,6-b′]-dithiophene (ITIC), with the P(NDI3N-F8-Br) CIL have been investigated using photoelectron spectroscopy. The results from spectroscopic investigation revealed that P(NDI3N-F8-Br) functions as a layer blocking the hole transport into the active layer, which is its desirable function. The relatively high lowest unoccupied molecular orbital level of P(NDI3N-F8-Br) introduces an energetic barrier for direct electron transport; however, owing to the ultrathin nature of the interlayer and the formation of favorable interfacial energetics, efficient electron extraction can still occur. Further, energy shifts of the components of PTB7-Th and ITIC have been probed with X-ray photoelectron spectroscopy after changing the thicknesses of the layers, which indicates that two dipoles were formed at the interfaces of active layers and P(NDI3N-F8-Br). The first dipole was formed at the interfaces of active layers/P(NDI3N-F8-Br), whereas an opposite polarity dipole was formed after increasing the layer thickness and created at the bulk rather than at the interface. This study highlights the importance of understanding the energy levels, which is a significant factor in designing a device.

ACS Applied Electronic Materials
Flinders University (AU), Imam Abdulrahman Bin Faisal University (SA)
Affordable and clean energy
Organic Electronics and Photovoltaics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon