Microstructural Tailoring for Enhanced Strength–Ductility Balance and Corrosion Resistance in Fe–25Mn–12Al–1C–3.5Ni Lightweight Steel via Cold Rolling–Annealing–Aging Treatments
This study systematically investigated the microstructural evolution, mechanical properties, and corrosion resistance of Fe–25Mn–12Al–1C–3.5Ni lightweight steel via cold rolling, annealing, and aging. The 15 min‐annealed and aged sample (Age15) achieved an excellent strength–ductility balance at a high strength level (YS ~ 1051 MPa, UTS ~ 1216 MPa, UE ~ 17.5%, and PSE ~ 21.32 GPa·%) owing to dense κ‑carbide precipitation in a recrystallized matrix. The solely 15 min‐annealed specimen (AN15) exhibited the highest corrosion resistance, with the lowest corrosion current density (1.22 × 10 −7 A/cm 2 ) and the largest charge‐transfer resistance, which was associated with its relatively homogeneous recrystallized microstructure and reduced defect density. Therefore, cold rolling followed by 1100 °C/15 min annealing and 600 °C/15 min aging was identified as the optimal route delivering outstanding strength–ductility synergy and good corrosion resistance.
Authors
- Qiyuan Chen (ORCID: https://orcid.org/0000-0002-3033-7021)
- Bin Zhang (ORCID: https://orcid.org/0000-0002-2449-9374)
- Zhenxing Li
- Haifeng Cao
- Ying Dong
- Mingxing Ma
Institutions
- Nanjing Institute of Technology (CN)
- Henan University of Technology (CN)
- Soochow University (CN)
- Changzhou University (CN)
Publication Details
- Journal
- Advanced Engineering Materials
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1002/adem.71438
- Primary Topic
- Microstructure and Mechanical Properties of Steels
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Natural Science Foundation of China
- Henan Provincial Science and Technology Research Project