Clampload Mechanics and Torque Relaxation in Self‐Forming Screw Joints of Fiber‐Reinforced Polymer Laminates: Experimental Characterization and an Experimentally Calibrated Predictive Model

ABSTRACT Self‐forming screw joining of fiber‐reinforced polymer (FRP) laminates presents unique process challenges arising from coupled thread formation, torque partitioning, and laminate damage mechanisms that distinguish these joints from conventional metallic assemblies. This study systematically investigates clampload generation and relaxation behavior in FRP screw joints, evaluating four screw configurations: metric, self‐tapping, self‐cutting, and self‐drilling across bidirectional woven and chopped strand mat glass FRP laminates under controlled installation conditions. Torque–angle and clampload responses are characterized to quantify torque‐to‐clampload conversion efficiency and identify the process‐level mechanisms governing joint performance. Results reveal that clampload develops only after full thread seating, with a linear torque–clampload relationship in the tightening regime. Metric screws achieve the highest conversion efficiency, while self‐forming screws exhibit reduced efficiency due to energy dissipation during thread formation and installation‐induced microstructural damage both inherent to the self‐forming process in FRP laminates. Laminate architecture exerts a dominant influence: bidirectional laminates provide superior radial fiber confinement and higher clampload, whereas chopped strand mat laminates exhibit reduced efficiency driven by higher transverse compliance. Thermal aging studies quantify progressive torque relaxation across all screw‐laminate combinations through residual torque measurements, revealing architecture and screw‐type‐dependent relaxation rates. An experimentally calibrated predictive model is developed and validated, incorporating seating torque and an effective torque coefficient to relate installation torque to generated clampload. The model demonstrates good agreement with experimental results across all configurations, providing a practically applicable and physically grounded framework for the design and optimisation of self‐forming screw joints in FRP composite structures.

Authors

Institutions

Publication Details

Journal
Polymer Composites
Published
2026-11-17
DOI
https://doi.org/10.1002/pc.71854
Primary Topic
Engineering Structural Analysis Methods
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Clampload Mechanics and Torque Relaxation in Self‐Forming Screw Joints of Fiber‐Reinforced Polymer Laminates: Experimental Characterization and an Experimentally Calibrated Predictive Model

Balaji Ravichandran, M. Balasubramanian
2 links
Polymer Composites
Engineering Structural Analysis Methods
article

Clampload Mechanics and Torque Relaxation in Self‐Forming Screw Joints of Fiber‐Reinforced Polymer Laminates: Experimental Characterization and an Experimentally Calibrated Predictive Model

Balaji Ravichandran, M. Balasubramanian
article en

Abstract

ABSTRACT Self‐forming screw joining of fiber‐reinforced polymer (FRP) laminates presents unique process challenges arising from coupled thread formation, torque partitioning, and laminate damage mechanisms that distinguish these joints from conventional metallic assemblies. This study systematically investigates clampload generation and relaxation behavior in FRP screw joints, evaluating four screw configurations: metric, self‐tapping, self‐cutting, and self‐drilling across bidirectional woven and chopped strand mat glass FRP laminates under controlled installation conditions. Torque–angle and clampload responses are characterized to quantify torque‐to‐clampload conversion efficiency and identify the process‐level mechanisms governing joint performance. Results reveal that clampload develops only after full thread seating, with a linear torque–clampload relationship in the tightening regime. Metric screws achieve the highest conversion efficiency, while self‐forming screws exhibit reduced efficiency due to energy dissipation during thread formation and installation‐induced microstructural damage both inherent to the self‐forming process in FRP laminates. Laminate architecture exerts a dominant influence: bidirectional laminates provide superior radial fiber confinement and higher clampload, whereas chopped strand mat laminates exhibit reduced efficiency driven by higher transverse compliance. Thermal aging studies quantify progressive torque relaxation across all screw‐laminate combinations through residual torque measurements, revealing architecture and screw‐type‐dependent relaxation rates. An experimentally calibrated predictive model is developed and validated, incorporating seating torque and an effective torque coefficient to relate installation torque to generated clampload. The model demonstrates good agreement with experimental results across all configurations, providing a practically applicable and physically grounded framework for the design and optimisation of self‐forming screw joints in FRP composite structures.

Polymer Composites
Indian Institute of Technology Madras (IN)
Engineering Structural Analysis Methods
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon