A Study on Parametric Appraisal of Drilling Process on Epoxy Composites Reinforced With Steel Wire and Glass Fibers

ABSTRACT This study investigates the drilling performance of glass‐steel‐epoxy hybrid composites with two stacking configurations, G7S4 and G4S7, using a Taguchi L 25 design. The effects of spindle speed (1000–3000 rpm), feed rate (20–100 mm/min), and drill diameter (2–10 mm) on thrust force, torque, and exit‐side delamination factor are investigated. Analysis of variance revealed that drill diameter is the dominant parameter affecting thrust force, contributing 63.49% and 60.93% for G7S4 and G4S7, respectively, while its contribution to torque is 66.37% and 68.06%. In contrast, feed rate is the most influential parameter governing delamination, contributing 71.44% for G7S4 and 69.58% for G4S7. For the combined drilling responses, feed rate showed the highest influence, with contributions of 58.94% and 59.40% for G7S4 and G4S7, respectively, followed by drill diameter. Grey relational analysis identified optimum experimental combinations of 1500 rpm, 20 mm/min, and 4 mm for G7S4 and 2000 rpm, 20 mm/min, and 6 mm for G4S7. The findings of this study suggest that by increasing the steel reinforced layers, improved results such as reduced exit‐side delamination are obtained, highlighting the influence of hybrid stacking architecture on drilling performance.

Authors

Institutions

Publication Details

Journal
Polymer Composites
Published
2026-11-16
DOI
https://doi.org/10.1002/pc.71872
Primary Topic
Advanced machining processes and optimization
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

A Study on Parametric Appraisal of Drilling Process on Epoxy Composites Reinforced With Steel Wire and Glass Fibers

Alok Satapathy, Subham Kumar Bhoi
Polymer Composites
Advanced machining processes and optimization
article

A Study on Parametric Appraisal of Drilling Process on Epoxy Composites Reinforced With Steel Wire and Glass Fibers

Alok Satapathy, Subham Kumar Bhoi
article en

Abstract

ABSTRACT This study investigates the drilling performance of glass‐steel‐epoxy hybrid composites with two stacking configurations, G7S4 and G4S7, using a Taguchi L 25 design. The effects of spindle speed (1000–3000 rpm), feed rate (20–100 mm/min), and drill diameter (2–10 mm) on thrust force, torque, and exit‐side delamination factor are investigated. Analysis of variance revealed that drill diameter is the dominant parameter affecting thrust force, contributing 63.49% and 60.93% for G7S4 and G4S7, respectively, while its contribution to torque is 66.37% and 68.06%. In contrast, feed rate is the most influential parameter governing delamination, contributing 71.44% for G7S4 and 69.58% for G4S7. For the combined drilling responses, feed rate showed the highest influence, with contributions of 58.94% and 59.40% for G7S4 and G4S7, respectively, followed by drill diameter. Grey relational analysis identified optimum experimental combinations of 1500 rpm, 20 mm/min, and 4 mm for G7S4 and 2000 rpm, 20 mm/min, and 6 mm for G4S7. The findings of this study suggest that by increasing the steel reinforced layers, improved results such as reduced exit‐side delamination are obtained, highlighting the influence of hybrid stacking architecture on drilling performance.

Polymer Composites
National Institute of Technology Rourkela (IN)
Advanced machining processes and optimization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon