Influence of dipping heterogeneous layers and contact strength on dyke ascent: Observations from analogue models

Abstract Magma intrusions approaching the surface commonly encounter dipping, mechanically heterogeneous layers in folded sequences, composite volcanoes and calderas, yet most models used to interpret volcano deformation assume a homogeneous or horizontally layered crust. In analogue dyke experiments, we injected water into two layers of elastic gelatine solid separated by a 45°-dipping interface, sing polarised light and particle image velocimetry to track the ascent dynamics. The stiffness ratio (EU/EL=0.4-2) of the gelatine, the contact strength (weak or strong) between layers, and the lateral offset between the injection point and the interface were varied. A penny-shaped dyke formed, and its geometry, ascent velocity and eruption location changed depending on whether, and at what depth, it intercepted the interface, and what the stiffness contrast was. Contact strength controlled whether the dyke crossed the interface or deflected along it. When interface interception occurred at depth, lateral growth almost stopped, the upper part of the dyke narrowed and ascent rate increased until eruption, independent of contact strength. Deflection occurred only where a weak contact was combined with an offset injection point, for stiffness ratios above and below unity, and caused the eruption site to be displaced laterally. Asymmetric stress and strain fields developed both around a vertical dyke beneath a dipping stiffness contrast, depending on which layer was stiffer, and around dykes deflected near a weak interface. As both configurations produced asymmetric surface displacement, we suggest an asymmetric deformation signal detected in nature may not by itself distinguish between them. Interception of a dipping contact could also appear as a late acceleration of precursory seismicity and deformation, which may be relevant to hazard assessment.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-17
DOI
https://doi.org/10.21203/rs.3.rs-11529695/v1
Primary Topic
Geological and Geophysical Studies
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Influence of dipping heterogeneous layers and contact strength on dyke ascent: Observations from analogue models

Gloria Arancibia, Caitlin Chalk, Janine Kavanagh, Matías Clunes et al.
Research Square
Geological and Geophysical Studies
preprint

Influence of dipping heterogeneous layers and contact strength on dyke ascent: Observations from analogue models

Gloria Arancibia, Caitlin Chalk, Janine Kavanagh, Matías Clunes, John Browning
preprint en

Abstract

Abstract Magma intrusions approaching the surface commonly encounter dipping, mechanically heterogeneous layers in folded sequences, composite volcanoes and calderas, yet most models used to interpret volcano deformation assume a homogeneous or horizontally layered crust. In analogue dyke experiments, we injected water into two layers of elastic gelatine solid separated by a 45°-dipping interface, sing polarised light and particle image velocimetry to track the ascent dynamics. The stiffness ratio (EU/EL=0.4-2) of the gelatine, the contact strength (weak or strong) between layers, and the lateral offset between the injection point and the interface were varied. A penny-shaped dyke formed, and its geometry, ascent velocity and eruption location changed depending on whether, and at what depth, it intercepted the interface, and what the stiffness contrast was. Contact strength controlled whether the dyke crossed the interface or deflected along it. When interface interception occurred at depth, lateral growth almost stopped, the upper part of the dyke narrowed and ascent rate increased until eruption, independent of contact strength. Deflection occurred only where a weak contact was combined with an offset injection point, for stiffness ratios above and below unity, and caused the eruption site to be displaced laterally. Asymmetric stress and strain fields developed both around a vertical dyke beneath a dipping stiffness contrast, depending on which layer was stiffer, and around dykes deflected near a weak interface. As both configurations produced asymmetric surface displacement, we suggest an asymmetric deformation signal detected in nature may not by itself distinguish between them. Interception of a dipping contact could also appear as a late acceleration of precursory seismicity and deformation, which may be relevant to hazard assessment.

Research Square
University of Liverpool (GB), Pontificia Universidad Católica de Chile (CL), University College London (GB), University of Chile (CL)
Geological and Geophysical Studies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon