Investigation of POE Filling Behaviour in Cell-Edge Gaps During Photovoltaic Module Lamination

During the lamination process of photovoltaic module stacks, the filling of gaps along solar cell edges by the encapsulant film affects local encapsulation quality. As the polyolefin elastomer (POE) film softens with heating, pressing drives it into these gaps. The resulting filling depends on the pressing conditions. However, the impact of pressing parameters on the average filling rate and coverage at different edge locations remain unclear. This study employed a three-dimensional transient numerical model to examine the effects of pressing duration, displacement, and velocity profile on POE gap filling. With a displacement of 12 μm per glass layer, the 200 s case achieved the highest filling rate among the durations examined, reaching 85.84%. Extending pressing beyond 200 s did not improve the overall filling fraction. Increasing the displacement primarily improved filling beneath the short edge and at the outer edge of the gap, although the gain diminished at larger displacements. At the same displacement and duration, the half-sinusoidal velocity profile produced a higher filling rate than the early-slow profile. These results inform the selection of lamination parameters for double-glass photovoltaic module stacks with ultrathin silicon cells and provide an approach for evaluating gap filling across different cell and POE film dimensions.

Authors

Institutions

Publication Details

Journal
Energies
Published
2026-11-17
DOI
https://doi.org/10.3390/en19225555
Primary Topic
Silicon and Solar Cell Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Investigation of POE Filling Behaviour in Cell-Edge Gaps During Photovoltaic Module Lamination

Gang Xiao, Peiwang Zhu, Junhe Zhou, Xiangyu Xie
2 links
Energies
Silicon and Solar Cell Technologies
article

Investigation of POE Filling Behaviour in Cell-Edge Gaps During Photovoltaic Module Lamination

Gang Xiao, Peiwang Zhu, Junhe Zhou, Xiangyu Xie
article en

Abstract

During the lamination process of photovoltaic module stacks, the filling of gaps along solar cell edges by the encapsulant film affects local encapsulation quality. As the polyolefin elastomer (POE) film softens with heating, pressing drives it into these gaps. The resulting filling depends on the pressing conditions. However, the impact of pressing parameters on the average filling rate and coverage at different edge locations remain unclear. This study employed a three-dimensional transient numerical model to examine the effects of pressing duration, displacement, and velocity profile on POE gap filling. With a displacement of 12 μm per glass layer, the 200 s case achieved the highest filling rate among the durations examined, reaching 85.84%. Extending pressing beyond 200 s did not improve the overall filling fraction. Increasing the displacement primarily improved filling beneath the short edge and at the outer edge of the gap, although the gain diminished at larger displacements. At the same displacement and duration, the half-sinusoidal velocity profile produced a higher filling rate than the early-slow profile. These results inform the selection of lamination parameters for double-glass photovoltaic module stacks with ultrathin silicon cells and provide an approach for evaluating gap filling across different cell and POE film dimensions.

EnergiesVol. 19(22)
State Key Laboratory of Clean Energy Utilization (CN), Zhejiang University (CN)
Affordable and clean energy
Silicon and Solar Cell Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon