Thin-Film Formation of Alq3 and TiO2 by Friction-Transfer Technique Applicable to Organic and Inorganic Materials for Device Applications
Friction-transfer printing has been an excellent technique for achieving thin-film formation of conjugated polymers. In this study, we attempted to fabricate friction-transferred films of small-molecule and inorganic materials that had previously been difficult to transfer. Tris(8-hydroxyquinolinato)aluminum (Alq3) or titanium dioxide (TiO2) powders were mixed with polymeric binders, followed by compression with a hydraulic press to form composite pellets. Friction-transfer printing using the mixed pellets enabled the formation of Alq3 and TiO2 thin films. Notably, the friction-transfer printing process itself operates below 100℃, although a post-annealing treatment at 300℃ can be applied to remove the polymeric binder. As a demonstration of device application, the friction-transferred TiO2 film was successfully implemented in an inverted organic photovoltaic cell. The friction-transfer technique is characterized by low-temperature operation below 100C and extremely short processing times of only a few seconds, suggesting its potential as a novel film-deposition technique for functional materials.
Authors
- 岡本 響
- Masahiro Misaki
Institutions
- National Institute of Technology, Nara College (JP)
Publication Details
- Journal
- Journal of the Society of Materials Science Japan
- Published
- 2026-11-17
- DOI
- https://doi.org/10.2472/jsms.2026.00039
- Primary Topic
- Nanofabrication and Lithography Techniques
- Type
- article
- Field-Weighted Citation Impact
- 0.00