Series compensation for the ride-through of current-limited grid-forming plants: a power ceiling, a planning criterion and hardware-in-the-loop validation

Abstract Grid-forming (GFM) plants limit their current during faults, and while limited they lose much of their ability to stay in synchronism. Many of these plants are connected through long transmission corridors that already carry, or could carry, a thyristor-controlled series capacitor (TCSC) or a static synchronous series compensator (SSSC). This paper asks when such a device can keep a current-limited GFM inverter in synchronism. For a virtual synchronous machine with current-reference saturation, the power transferred while the current is limited has a ceiling set only by the current limit and the grid voltage. Series compensation cannot raise this ceiling, and inserted inductance can only lower the power curve. What a series device can do is restore the post-fault equilibrium after a line outage. A closed-form minimum compensation for each N-1 outage turns this into a screening map that shows which outages need series compensation, how much, and which need a run-back instead. A coordinated scheme of a virtual-rotor angle freeze and a saturation-aware TCSC boost rode through 1 s faults in all 22 single-machine cases of a phasor study. A switched-thyristor Simulink model, a small-signal resonance study, a modified IEEE 39-bus system and controller-hardware-in-the-loop tests on three microcontroller boards support these findings. The hardware critical clearing times matched a desktop run of the same code within one 2 ms bisection step in 30 of 36 comparisons. On resistive corridors the boost can shorten the critical clearing time, so it should be armed only for the outages the map identifies.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-17
DOI
https://doi.org/10.21203/rs.3.rs-11736181/v1
Primary Topic
Power System Optimization and Stability
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Series compensation for the ride-through of current-limited grid-forming plants: a power ceiling, a planning criterion and hardware-in-the-loop validation

Muzeeb Khan Patan
3 links
Research Square
Power System Optimization and Stability
preprint

Series compensation for the ride-through of current-limited grid-forming plants: a power ceiling, a planning criterion and hardware-in-the-loop validation

Muzeeb Khan Patan
preprint en

Abstract

Abstract Grid-forming (GFM) plants limit their current during faults, and while limited they lose much of their ability to stay in synchronism. Many of these plants are connected through long transmission corridors that already carry, or could carry, a thyristor-controlled series capacitor (TCSC) or a static synchronous series compensator (SSSC). This paper asks when such a device can keep a current-limited GFM inverter in synchronism. For a virtual synchronous machine with current-reference saturation, the power transferred while the current is limited has a ceiling set only by the current limit and the grid voltage. Series compensation cannot raise this ceiling, and inserted inductance can only lower the power curve. What a series device can do is restore the post-fault equilibrium after a line outage. A closed-form minimum compensation for each N-1 outage turns this into a screening map that shows which outages need series compensation, how much, and which need a run-back instead. A coordinated scheme of a virtual-rotor angle freeze and a saturation-aware TCSC boost rode through 1 s faults in all 22 single-machine cases of a phasor study. A switched-thyristor Simulink model, a small-signal resonance study, a modified IEEE 39-bus system and controller-hardware-in-the-loop tests on three microcontroller boards support these findings. The hardware critical clearing times matched a desktop run of the same code within one 2 ms bisection step in 30 of 36 comparisons. On resistive corridors the boost can shorten the critical clearing time, so it should be armed only for the outages the map identifies.

Research Square
University of Technology and Applied Sciences, Muscat (OM), University of Technology and Applied Sciences (OM)
Industry, innovation and infrastructure, Affordable and clean energy
Power System Optimization and Stability
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon