Suitability of X-ray densitometry for assessing density profiles in chemically modified wood
Abstract X-ray densitometry was evaluated for its suitability to characterize density profiles in chemically modified wood, using sorbitol–citric acid (SorCA)-modified Scots pine sapwood as a model material. Gravimetric layer-by-layer profiling served as the reference method. The influence of sample orientation on X-ray density profiles and the effect of density heterogeneity in more than one anatomical direction were investigated. In unmodified reference samples, the two methods gave comparable results. In modified samples, X-ray densitometry reliably captured the general shape of density profiles and appears suitable for assessing the spatial distribution of chemical loading across the cross-section. However, systematic deviations were observed: density was underestimated in high-density surface zones and overestimated in the low-density core zone. Expressed relative to the density increase due to modification, differences in the core zone were considerable. X-ray density profiles therefore do not allow direct conclusions on local chemical loading. An additional density gradient perpendicular to the profiling direction caused X-ray profiles to vary with sample orientation in the densitometer. Removing this gradient by additional sample preparation reduced this variation but did not improve agreement with the gravimetric reference; this preparation step is therefore not required.
Authors
- Susanne Bollmus (ORCID: https://orcid.org/0000-0002-3852-9087)
- Holger Militz (ORCID: https://orcid.org/0000-0001-7083-9491)
- Philipp Schlotzhauer (ORCID: https://orcid.org/0000-0002-8736-2981)
- Christoph Hötte
Institutions
- University of Göttingen (DE)
Publication Details
- Journal
- Wood Science and Technology
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1007/s00226-026-01824-0
- Primary Topic
- Wood Treatment and Properties
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Georg-August-Universität Göttingen