Effect of Cooling Pipe Diameter on Tritium Production Distribution in a Water-Cooled Blanket for a DEMO Reactor

Demonstration fusion reactor (DEMO) will aim to fulfill the tritium self-sufficiency in fuel recycling and generate economical fusion energy in the future. Tritium self-sufficiency is one of the key requirements for future fusion reactors. In water-cooled solid breeder blankets, the cooling-channel geometry affects neutron moderation and consequently influences the spatial distribution of tritium breeding. This study quantitatively evaluates the effect of cooling pipe diameter on near-pipe tritium accumulation and tritium release potential in a PWR water-cooled solid breeder blanket. Five cooling pipe diameters, 5.6, 7.5, 9.3, 11.3, and 13.8 mm, are considered using local tritium production densities extracted at positions far from and close to the cooling pipe. Three indicators are introduced, the tritium production density difference, the near-pipe enhancement ratio, and the tritium accumulation factor. The results show that as the cooling pipe diameter increases from 5.6 to 13.8 mm, the near-pipe tritium production density increases from 1.37 × 1013 to 1.88 × 1013 n × s−1 × cm−3, whereas the far-pipe value changes only slightly from 1.26 × 1013 to 1.32 × 1013 n × s−1 × cm−3. The enhancement ratio increases from 8.7% to 42.4%, and the accumulation factor increases from 1.087 to 1.424. These results indicate that increasing the cooling pipe diameter mainly intensifies local tritium accumulation in the low-temperature region around the cooling pipe rather than uniformly increasing tritium production throughout the breeder zone. Therefore, cooling pipe diameter optimization should consider heat removal, tritium breeding performance, and tritium release potential simultaneously.

Authors

Institutions

Publication Details

Journal
Fusion Science & Technology
Published
2026-11-17
DOI
https://doi.org/10.1080/15361055.2026.2757942
Primary Topic
Fusion materials and technologies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of Cooling Pipe Diameter on Tritium Production Distribution in a Water-Cooled Blanket for a DEMO Reactor

Jie Li, Jie Zhang
Fusion Science & Technology
Fusion materials and technologies
article

Effect of Cooling Pipe Diameter on Tritium Production Distribution in a Water-Cooled Blanket for a DEMO Reactor

Jie Li, Jie Zhang
article en

Abstract

Demonstration fusion reactor (DEMO) will aim to fulfill the tritium self-sufficiency in fuel recycling and generate economical fusion energy in the future. Tritium self-sufficiency is one of the key requirements for future fusion reactors. In water-cooled solid breeder blankets, the cooling-channel geometry affects neutron moderation and consequently influences the spatial distribution of tritium breeding. This study quantitatively evaluates the effect of cooling pipe diameter on near-pipe tritium accumulation and tritium release potential in a PWR water-cooled solid breeder blanket. Five cooling pipe diameters, 5.6, 7.5, 9.3, 11.3, and 13.8 mm, are considered using local tritium production densities extracted at positions far from and close to the cooling pipe. Three indicators are introduced, the tritium production density difference, the near-pipe enhancement ratio, and the tritium accumulation factor. The results show that as the cooling pipe diameter increases from 5.6 to 13.8 mm, the near-pipe tritium production density increases from 1.37 × 1013 to 1.88 × 1013 n × s−1 × cm−3, whereas the far-pipe value changes only slightly from 1.26 × 1013 to 1.32 × 1013 n × s−1 × cm−3. The enhancement ratio increases from 8.7% to 42.4%, and the accumulation factor increases from 1.087 to 1.424. These results indicate that increasing the cooling pipe diameter mainly intensifies local tritium accumulation in the low-temperature region around the cooling pipe rather than uniformly increasing tritium production throughout the breeder zone. Therefore, cooling pipe diameter optimization should consider heat removal, tritium breeding performance, and tritium release potential simultaneously.

Fusion Science & Technology
Chinese Academy of Sciences (CN)
Chongqing Municipal Education Commission
Affordable and clean energy
Fusion materials and technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon