Low-Temperature Growth of Nanostructured Ti–Si–C MAX Phase Coatings Enabled by Highly Ionized Reactive Physical Vapor Deposition
MAX phases are a unique class of layered compounds that combine metallic and ceramic properties, making them highly attractive as multifunctional materials for next-generation technologies. However, their synthesis typically requires elevated temperatures, posing a major challenge, particularly for thin film growth, where substrate limitations and integration constraints hinder widespread technological implementation. This work demonstrates that highly ionized physical vapor deposition (PVD) techniques can significantly lower the growth temperature required for direct, single-step MAX phase synthesis. Using the archetypal Ti-Si-C system as a benchmark, coatings deposited by reactive cathodic arc evaporation (r-CAE) and reactive high-power impulse magnetron sputtering (r-HiPIMS) at a growth temperature of 550 °C are systematically investigated. By integrating ab initio simulations, synchrotron X-ray diffraction, and atomic-resolution scanning transmission electron microscopy, this study reveals that phase competition and defects are critical factors governing MAX phase formation under kinetically constrained growth conditions. Notably, r-CAE yielded indirect evidence consistent with the formation of a Ti2SiC MAX nanostructure (estimated phase fraction ∼4.5%) embedded within a Ti5Si3Cx matrix, while r-HiPIMS produced a Ti3SiC2 coating with an unconventional in-plane c-axis orientation at a 200 °C lower growth temperature than conventional direct current magnetron sputtering. These findings underscore the potential of highly ionized PVD growth methods to reduce MAX phase synthesis temperatures and expand substrate compatibility, thereby facilitating the broader application of MAX phase coatings.
Authors
- Christina Krywka (ORCID: https://orcid.org/0000-0003-2940-3359)
- Daniel Primetzhofer (ORCID: https://orcid.org/0000-0002-5815-3742)
- Peter Polcik (ORCID: https://orcid.org/0000-0003-3111-0029)
- Jürgen Ramm (ORCID: https://orcid.org/0000-0001-7314-5938)
- Helmut Riedl (ORCID: https://orcid.org/0000-0002-8108-1185)
- Eleni Ntemou (ORCID: https://orcid.org/0000-0002-8518-2661)
- Anton Davydok (ORCID: https://orcid.org/0000-0001-8198-8230)
- Rainer Hahn (ORCID: https://orcid.org/0000-0002-7322-8108)
- S. Kolozsvári (ORCID: https://orcid.org/0000-0002-3397-7681)
- Peter Švec (ORCID: https://orcid.org/0000-0002-2257-3710)
- Philipp Dörflinger
- Christian Gutschka (ORCID: https://orcid.org/0009-0005-2977-053X)
- Arno Gitschthaler (ORCID: https://orcid.org/0009-0000-4196-8964)
- Klaus Boebel
Institutions
- Uppsala University (SE)
- TU Wien (AT)
- Institute of Chemistry of the Slovak Academy of Sciences (SK)
- Slovak Academy of Sciences (SK)
- Oerlikon (Liechtenstein) (LI)
- Biomedical Research Center of the Slovak Academy of Sciences (SK)
- Helmholtz-Zentrum Hereon (DE)
- Plansee (Germany) (DE)
Publication Details
- Journal
- ACS Nano
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1021/acsnano.6c10193
- Citations
- 1
- Primary Topic
- MXene and MAX Phase Materials
- Type
- article
- Field-Weighted Citation Impact
- 0.87
Funders
- Österreichische Nationalstiftung für Forschung, Technologie und Entwicklung
- Slovenská Akadémia Vied
- Government of the United Kingdom
- UK Research and Innovation
- Plansee Composite Materials
- European Commission
- Austrian Science Fund
- Oerlikon
- Vetenskapsrådet
- Technische Universität Wien
- Agentúra na Podporu Výskumu a Vývoja
- Christian Doppler Forschungsgesellschaft
- Vedecká Grantová Agentúra MŠVVaŠ SR a SAV
- Uppsala Universitet
- HORIZON EUROPE Framework Programme
- Science and Technology Facilities Council
- Deutsches Elektronen-Synchrotron
- Staatssekretariat für Bildung, Forschung und Innovation
- Technische Universität Wien Bibliothek
- NextGenerationEU