Controllable Synthesis of Carbon Nanotubes and Their Applications in Microwave Absorption
Single-walled carbon nanotubes (SWCNTs) showing magnetic-field-dependent radial breathing mode (RBM) features can be prepared by using a magnetic-field-guided direct current arc-discharge technique. In this work, we have first reported a highly efficient and scalable technique by which the synthesized SWCNTs with a diameter-selective distribution were directionally separated into two different regions (e.g., Down region and Up region). Then, the barium ferrite (BaFe12O9) nanoparticle crystals were prepared by a facile approach based on nitrate citric acid sol–gel auto-ignition. Finally, the systematic electromagnetism and microwave absorption performance of SWCNT/BaFe12O19 composites prepared from nanotubes synthesized under nominal magnetic flux densities of 0–0.0889 T were compared within the frequency region from 2.0 to 18 GHz. At a thickness of 2 mm, sample #5 exhibited a calculated minimum reflection loss (RL) of −33.8 dB at 13.15 GHz and an effective absorption bandwidth (RL < −10 dB) of 5.6 GHz, extending from 10.8 to 16.4 GHz. The results indicate that the synthesis magnetic field and collection location influence the Raman characteristics of SWCNT products and the calculated microwave response of their ferrite composites.
Authors
- Dongming Cai
- Minglei Cao (ORCID: https://orcid.org/0000-0001-8874-6066)
- Helin Wang
- Chaoyang Wang
- Wenna Zhang
- Mengping Liu
- Xiangyin Jiang
- Xiaohai Li
Institutions
- Jiamusi University (CN)
- Hubei University of Automotive Technology (CN)
Publication Details
- Journal
- Materials
- Published
- 2026-11-17
- DOI
- https://doi.org/10.3390/ma19224863
- Primary Topic
- Electromagnetic wave absorption materials
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Department of Education, Heilongjiang Province
- Hubei University of Automotive Technology
- Science and Technology Department of Hubei Province