Finite Element Simulation of the Polishing Process for Aluminum Workpieces in the LS-DYNA Software

Abstract Finishing of long cylindrical aluminium components increasingly relies on abrasive belt machining, yet dependable guidelines for selecting its operating regimes remain scarce. To help close this gap, the present work applies explicit dynamic finite element modelling in LS-DYNA to reproduce, at the scale of a single abrasive grain, how the surface of a 6061-T6 alloy is generated during belt polishing. Two idealised grain geometries are contrasted: a truncated cone standing for a fresh abrasive and a half-ellipsoid approximating the same grain after wear. The material response is captured through the Johnson-Cook constitutive and fracture relations together with a Mie-Grüneisen equation of state, so that high strain rates, frictional heating and element erosion are reflected. For each geometry the resultant contact force, the total, sliding and workpiece-side energies, the actual contact area, the contact-zone temperature, the chip morphology and the residual groove profile were examined while the sliding velocity, the indentation depth and the friction coefficient were varied. The computations show that wear-driven rounding of the grain reduces the polishing force at low speeds but simultaneously raises the dissipated energy and the local heating, whereas the conical grain leaves a smoother groove under milder thermal loading. Near a practical belt speed of about 5 m/s the predicted temperature rise stays limited, and grain shape combined with cutting depth governs the attainable finish more strongly than speed alone. These findings offer a physically grounded basis for choosing rational polishing conditions and for deciding when a worn belt should be replaced.

Authors

Institutions

Publication Details

Journal
Management Systems in Production Engineering
Published
2026-11-17
DOI
https://doi.org/10.2478/mspe-2026-0053
Primary Topic
Advanced Surface Polishing Techniques
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Finite Element Simulation of the Polishing Process for Aluminum Workpieces in the LS-DYNA Software

Jiří Kuchař, Milan Sága, Sergei Bratan, Vladimir Pakhaliu et al.
Management Systems in Production Engineering
Advanced Surface Polishing Techniques
article

Finite Element Simulation of the Polishing Process for Aluminum Workpieces in the LS-DYNA Software

Jiří Kuchař, Milan Sága, Sergei Bratan, Vladimir Pakhaliu, Andrei Pakhaliuk, Boris Yakhimovich
article en

Abstract

Abstract Finishing of long cylindrical aluminium components increasingly relies on abrasive belt machining, yet dependable guidelines for selecting its operating regimes remain scarce. To help close this gap, the present work applies explicit dynamic finite element modelling in LS-DYNA to reproduce, at the scale of a single abrasive grain, how the surface of a 6061-T6 alloy is generated during belt polishing. Two idealised grain geometries are contrasted: a truncated cone standing for a fresh abrasive and a half-ellipsoid approximating the same grain after wear. The material response is captured through the Johnson-Cook constitutive and fracture relations together with a Mie-Grüneisen equation of state, so that high strain rates, frictional heating and element erosion are reflected. For each geometry the resultant contact force, the total, sliding and workpiece-side energies, the actual contact area, the contact-zone temperature, the chip morphology and the residual groove profile were examined while the sliding velocity, the indentation depth and the friction coefficient were varied. The computations show that wear-driven rounding of the grain reduces the polishing force at low speeds but simultaneously raises the dissipated energy and the local heating, whereas the conical grain leaves a smoother groove under milder thermal loading. Near a practical belt speed of about 5 m/s the predicted temperature rise stays limited, and grain shape combined with cutting depth governs the attainable finish more strongly than speed alone. These findings offer a physically grounded basis for choosing rational polishing conditions and for deciding when a worn belt should be replaced.

Management Systems in Production EngineeringVol. 34(4)
University of Žilina (SK), Sevastopol State University (UA), Czech Technical University in Prague (CZ), Sevastopol National Technical University (UA)
Vedecká Grantová Agentúra MŠVVaŠ SR a SAV
Advanced Surface Polishing Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon