In-line HCl/NaClO decontamination for carryover control in piezoelectric droplet-printing digital PCR

Piezoelectric droplet-on-demand printing enables controlled partition generation for digital polymerase chain reaction (dPCR) and spatially addressable droplet arrays. However, a shared dispensing nozzle introduces a risk of sample-to-sample carryover. Here, we evaluated four nozzle-cleaning strategies under fixed printing conditions: a de-ionized-water rinse, two commercial nucleic acid decontamination reagents (NH9901 and VNR11-01), and an automated in-line HCl/NaClO tip-cleaning procedure (G4). Cleaning efficacy was assessed by qPCR for carryover and inhibition and independently cross-validated by direct dPCR partition counting using two sample types. Under single-cycle conditions, G4 showed no detectable carryover: no-template control (NTC) amplification within 45 qPCR cycles and no positive dPCR partitions, without measurable inhibition in the corresponding positive controls. Zero positives among N = 19 469–20 412 analyzed NTC partitions correspond to a one-sided 95% upper bound of ≈3/N (≈1.5 × 10−4 per partition); these are reported as below the detection limit. Droplet-generation characteristics were preserved after a single cleaning cycle, and the digital signal response was proportional (FAM R2 = 0.9998; ROX R2 = 0.9972) with 3.31% within-session repeatability (n = 20). A 20-cycle assessment at a nominal 3.33 × 102 copies/μL kept NTC concentrations below the detection limit at all evaluated checkpoints with positive control (PC) concentrations of 3.62 × 102–3.64 × 102 copies/μL. Exploratory analysis of 493 clinical specimens assessed workflow applicability in complex biological matrices without diagnostic performance evaluation. This in-line decontamination strategy provides a practical approach for contamination-controlled nozzle operation in piezoelectric droplet-printing dPCR under the evaluated single-nozzle and single-platform conditions; broader robustness and long-term material compatibility remain to be established.

Authors

Institutions

Publication Details

Journal
Biomicrofluidics
Published
2026-11-17
DOI
https://doi.org/10.1063/5.0358108
Primary Topic
Molecular Biology Techniques and Applications
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

In-line HCl/NaClO decontamination for carryover control in piezoelectric droplet-printing digital PCR

Jie Hu, Mengqi Kong, Zonghao Li, Yuntong Gao et al.
Biomicrofluidics
Molecular Biology Techniques and Applications
article

In-line HCl/NaClO decontamination for carryover control in piezoelectric droplet-printing digital PCR

Jie Hu, Mengqi Kong, Zonghao Li, Yuntong Gao, Hongwei Quan, Deding Tang, Zhaonan Liu, Yan Gong
article en

Abstract

Piezoelectric droplet-on-demand printing enables controlled partition generation for digital polymerase chain reaction (dPCR) and spatially addressable droplet arrays. However, a shared dispensing nozzle introduces a risk of sample-to-sample carryover. Here, we evaluated four nozzle-cleaning strategies under fixed printing conditions: a de-ionized-water rinse, two commercial nucleic acid decontamination reagents (NH9901 and VNR11-01), and an automated in-line HCl/NaClO tip-cleaning procedure (G4). Cleaning efficacy was assessed by qPCR for carryover and inhibition and independently cross-validated by direct dPCR partition counting using two sample types. Under single-cycle conditions, G4 showed no detectable carryover: no-template control (NTC) amplification within 45 qPCR cycles and no positive dPCR partitions, without measurable inhibition in the corresponding positive controls. Zero positives among N = 19 469–20 412 analyzed NTC partitions correspond to a one-sided 95% upper bound of ≈3/N (≈1.5 × 10−4 per partition); these are reported as below the detection limit. Droplet-generation characteristics were preserved after a single cleaning cycle, and the digital signal response was proportional (FAM R2 = 0.9998; ROX R2 = 0.9972) with 3.31% within-session repeatability (n = 20). A 20-cycle assessment at a nominal 3.33 × 102 copies/μL kept NTC concentrations below the detection limit at all evaluated checkpoints with positive control (PC) concentrations of 3.62 × 102–3.64 × 102 copies/μL. Exploratory analysis of 493 clinical specimens assessed workflow applicability in complex biological matrices without diagnostic performance evaluation. This in-line decontamination strategy provides a practical approach for contamination-controlled nozzle operation in piezoelectric droplet-printing dPCR under the evaluated single-nozzle and single-platform conditions; broader robustness and long-term material compatibility remain to be established.

BiomicrofluidicsVol. 20(6)
Suzhou University of Science and Technology (CN), Maanshan Teacher's College (CN), Xi'an Jiaotong University (CN)
Scientific Research Foundation of Education Department of Anhui Province of China
Molecular Biology Techniques and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon