Generalized Homogenized Modeling of Forced Vibration in Lattice-Filled Plates: Topology Effects, Scaling, and Validity Assessment
A generalized homogenized plate model is assessed for the forced vibration of equal-mass body-centered cubic (BCC), face-centered cubic (FCC), and Octet lattice-filled cantilever plates. The five-degree-of-freedom model combines an energy-based generalized stiffness of the periodic lattice supercell with lattice-resolved inertia and is compared with detailed three-dimensional Timoshenko beam-lattice models. Natural frequencies, mode shapes, acceleration frequency-response functions, and band-root-mean-square (RMS) response are examined over 0.5–300 Hz. For the investigated panel, first-frequency differences are below 3.3%, and selected peak-magnitude and band-RMS differences remain below approximately 3.1%. These scalar measures do not imply equally small differences at individual frequencies near resonance. At a common mass of 0.2 kg, BCC has a lower first transverse frequency and a band-RMS response about 1.8–1.9 times that of FCC and Octet. The topology ranking persists over assumed damping ratios of 0.5–5%. Radius scaling identifies a predominantly bending-controlled response for BCC and stretching-controlled responses for FCC and Octet. Localization screening places the first candidates above the operating band. The results establish a focused numerical assessment of transverse bending response for the studied cantilever configuration.
Authors
- Fahimeh Mehralian (ORCID: https://orcid.org/0000-0003-4247-3730)
- Fevzi Çakmak Bolat (ORCID: https://orcid.org/0000-0003-1532-7631)
- Mohammad Rahmanian
Institutions
- Gebze Technical University (TR)
- Kocaeli Üniversitesi (TR)
Publication Details
- Journal
- Mathematics
- Published
- 2026-11-17
- DOI
- https://doi.org/10.3390/math14224220
- Primary Topic
- Cellular and Composite Structures
- Type
- article
- Field-Weighted Citation Impact
- 0.00