Pollutant Removal Efficacy and Bioelectricity Generation of Microbial Fuel Cells from Polluted Water using Different Electrodes

The discharge of untreated wastewater into water bodies creates serious ecological and health problems, highlighting the necessity for a sustainable, energy-efficient treatment solution. Microbial fuel cells (MFCs) have emerged as a promising bioelectrochemical technology that can treat wastewater while generating electricity from organic matter. This study evaluated double-chambered MFCs for concurrent electricity generation and wastewater treatment from dairy farm effluent and Turag River water over a 25-day operation. Three anode-cathode configurations: Graphite-Cu (G-Cu), Carbon fiber-Stainless steel (Cf-SS), and Carbon rod-Zn (CR-Zn), were compared for their electrochemical performance and pollutant removal efficiency. In dairy farm effluent, G-Cu produced the highest peak voltage (706.67 mV), current (0.2667 mA), and power (0.1884 mW) with 98.53% COD removal. In Turag River water, Cf-SS produced the highest voltage (676.67 mV) with COD removal (70.59%), while CR-Zn produced the highest current (0.2667 mA) and power (0.1751 mW). COD, TDS, TSS, and turbidity were reduced by the MFCs, although the removal efficiency varied among electrode configurations and wastewater types. Changes in pH were also observed after treatment. In addition, bacterial isolates obtained from the layer formed on the anode electrodes after 25 days of operation were identified using MALDI-TOF MS (Bruker MALDI Biotyper). The identified bacteria included species previously reported to have electroactive potential, suggesting their possible association with electricity generation in MFCs. Escherichia coli was also detected in both wastewater types, which may indicate fecal or domestic contamination. Overall, the study demonstrated the feasibility of using different electrode configurations for treating real wastewater while generating electricity under laboratory conditions. Among the tested configurations, G-Cu showed comparatively consistent electrical and treatment performance, although the highest performance for individual parameters varied among the electrode configurations and wastewater types.

Authors

Institutions

Publication Details

Journal
Global NEST Journal
Published
2026-11-17
DOI
https://doi.org/10.30955/gnj.08739
Primary Topic
Microbial Fuel Cells and Bioremediation
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Pollutant Removal Efficacy and Bioelectricity Generation of Microbial Fuel Cells from Polluted Water using Different Electrodes

Md. Mostafizur Rahman, Sadia Sikder, Abdulrazak Almaliki, Shadia Afrin Moon
1 links
Global NEST Journal
Microbial Fuel Cells and Bioremediation
article

Pollutant Removal Efficacy and Bioelectricity Generation of Microbial Fuel Cells from Polluted Water using Different Electrodes

Md. Mostafizur Rahman, Sadia Sikder, Abdulrazak Almaliki, Shadia Afrin Moon
article en

Abstract

The discharge of untreated wastewater into water bodies creates serious ecological and health problems, highlighting the necessity for a sustainable, energy-efficient treatment solution. Microbial fuel cells (MFCs) have emerged as a promising bioelectrochemical technology that can treat wastewater while generating electricity from organic matter. This study evaluated double-chambered MFCs for concurrent electricity generation and wastewater treatment from dairy farm effluent and Turag River water over a 25-day operation. Three anode-cathode configurations: Graphite-Cu (G-Cu), Carbon fiber-Stainless steel (Cf-SS), and Carbon rod-Zn (CR-Zn), were compared for their electrochemical performance and pollutant removal efficiency. In dairy farm effluent, G-Cu produced the highest peak voltage (706.67 mV), current (0.2667 mA), and power (0.1884 mW) with 98.53% COD removal. In Turag River water, Cf-SS produced the highest voltage (676.67 mV) with COD removal (70.59%), while CR-Zn produced the highest current (0.2667 mA) and power (0.1751 mW). COD, TDS, TSS, and turbidity were reduced by the MFCs, although the removal efficiency varied among electrode configurations and wastewater types. Changes in pH were also observed after treatment. In addition, bacterial isolates obtained from the layer formed on the anode electrodes after 25 days of operation were identified using MALDI-TOF MS (Bruker MALDI Biotyper). The identified bacteria included species previously reported to have electroactive potential, suggesting their possible association with electricity generation in MFCs. Escherichia coli was also detected in both wastewater types, which may indicate fecal or domestic contamination. Overall, the study demonstrated the feasibility of using different electrode configurations for treating real wastewater while generating electricity under laboratory conditions. Among the tested configurations, G-Cu showed comparatively consistent electrical and treatment performance, although the highest performance for individual parameters varied among the electrode configurations and wastewater types.

Global NEST Journal
Taif University (SA), Jahangirnagar University (BD), Bangladesh University of Professionals (BD)
Taif University
Clean water and sanitation, Affordable and clean energy, Responsible consumption and production
Microbial Fuel Cells and Bioremediation
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon