Study on the Deterioration of Ultra High Performance Concrete under the Coupling of Wet and Dry Cycling and Sulfate Erosion

Ultra-high-performance concrete (UHPC) is exposed to combined sulfate attack and wet–dry cycling in saline soil and coastal environments, and its deterioration is more complex than under simple immersion. To examine the evolution of UHPC performance under these coupled conditions, specimens were assigned to a water control group (S0) and a 5 wt% Na₂SO₄ solution group (S5) and subjected to six wet–dry cycles. Each cycle comprised 7 days of immersion and 8 days of drying at 80 °C. Mass loss rate, relative dynamic modulus of elasticity (RDEM), compressive strength and flexural strength were assessed. The results showed an overall two-stage pattern of initial densification and strengthening followed by damage and deterioration. Mass loss rates were initially negative because of continued hydration and water absorption, before gradually increasing. The S5 group changed from negative to positive values earlier than S0; after the sixth cycle, mass loss rates were 0.60% for S0 and 0.80% for S5. RDEM peaked after the second cycle and then decreased to approximately 0.93 and 0.87 for S0 and S5, respectively, corresponding to reductions of approximately 7% and 13%. Relative compressive strength also increased before decreasing to approximately 0.98 and 0.94, corresponding to reductions of approximately 2% and 6%. Peak flexural loads declined after the second cycle; after six cycles, these were approximately 5.1 kN and 4.3 kN for S0 and S5, respectively, with lower residual load-bearing capacity in the later stages for S5. Overall, coupled sulfate exposure and wet–dry cycling were associated with more pronounced deterioration of UHPC, consistent with the development of internal microcracks and weakening of the steel fibre–matrix interface. These findings provide experimental evidence relevant to durability evaluation of UHPC in saline soil and coastal environments.

Authors

Institutions

Publication Details

Journal
Advances in Research
Published
2026-11-17
DOI
https://doi.org/10.9734/air/2026/v27i61783
Primary Topic
Concrete Corrosion and Durability
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Study on the Deterioration of Ultra High Performance Concrete under the Coupling of Wet and Dry Cycling and Sulfate Erosion

Xuetao Xia
5 links
Advances in Research
Concrete Corrosion and Durability
article

Study on the Deterioration of Ultra High Performance Concrete under the Coupling of Wet and Dry Cycling and Sulfate Erosion

Xuetao Xia
article en

Abstract

Ultra-high-performance concrete (UHPC) is exposed to combined sulfate attack and wet–dry cycling in saline soil and coastal environments, and its deterioration is more complex than under simple immersion. To examine the evolution of UHPC performance under these coupled conditions, specimens were assigned to a water control group (S0) and a 5 wt% Na₂SO₄ solution group (S5) and subjected to six wet–dry cycles. Each cycle comprised 7 days of immersion and 8 days of drying at 80 °C. Mass loss rate, relative dynamic modulus of elasticity (RDEM), compressive strength and flexural strength were assessed. The results showed an overall two-stage pattern of initial densification and strengthening followed by damage and deterioration. Mass loss rates were initially negative because of continued hydration and water absorption, before gradually increasing. The S5 group changed from negative to positive values earlier than S0; after the sixth cycle, mass loss rates were 0.60% for S0 and 0.80% for S5. RDEM peaked after the second cycle and then decreased to approximately 0.93 and 0.87 for S0 and S5, respectively, corresponding to reductions of approximately 7% and 13%. Relative compressive strength also increased before decreasing to approximately 0.98 and 0.94, corresponding to reductions of approximately 2% and 6%. Peak flexural loads declined after the second cycle; after six cycles, these were approximately 5.1 kN and 4.3 kN for S0 and S5, respectively, with lower residual load-bearing capacity in the later stages for S5. Overall, coupled sulfate exposure and wet–dry cycling were associated with more pronounced deterioration of UHPC, consistent with the development of internal microcracks and weakening of the steel fibre–matrix interface. These findings provide experimental evidence relevant to durability evaluation of UHPC in saline soil and coastal environments.

Advances in ResearchVol. 27(6)
North China University of Water Resources and Electric Power (CN)
Concrete Corrosion and Durability
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon