Structural optimization design of Sorting Robots Based on dynamic modeling and Genghis Khan Shark Algorithm
Introduction To address the lack of collaborative optimization of structural parameters and dynamic responses in a four-finger cable-driven sorting robot, a structural parameter optimization model based on dynamic modeling and the Genghis Khan shark algorithm is proposed. Methods A rigid-flexible coupled dynamic model is established using Lagrange’s equation of the second kind, explicitly depicting joint flexibility and rope-wheel transmission coupling. An adaptive Lévy flight perturbation mechanism is introduced to improve the global optimization ability of the Genghis Khan shark algorithm, forming a closed-loop optimization framework integrating modeling, solution, and feedback. Results The method has an inference time of only 48.62 m, with computational load controlled at 312.47 MFlops. The root mean square values of joint driving torques are as low as 8.93 N m. Maximum structural deformation is 0.32-0.41 mm, and maximum equivalent stress is 112.4-128.6 MPa, meeting aluminum alloy strength constraints. The fitness improvement rate reaches 46.5%-51.2%, and total hand mass is 2.75-2.96 kg. Discussion The proposed method effectively solves the coupling optimization problem between structural parameters and dynamic responses through the collaborative mechanism of dynamic modeling and the improved Genghis Khan shark algorithm, providing key technical support for robot structural design in high-speed sorting scenarios such as food, electronics, and automotive components.
Authors
- Xiaona Cai
Institutions
- Guangdong University of Science and Technology (CN)
Publication Details
- Journal
- Frontiers in Mechanical Engineering
- Published
- 2026-11-17
- DOI
- https://doi.org/10.3389/fmech.2026.1994122
- Primary Topic
- Robotic Mechanisms and Dynamics
- Type
- article
- Field-Weighted Citation Impact
- 0.00