Structural Parameter Optimization and Motion Planning of a Hydraulic Swing Mechanism for a Ground-Mobile Photovoltaic Panel Cleaning Robot
Hydraulic swing mechanisms for ground-mobile photovoltaic (PV) cleaning robots must balance working swing range against actuator force while accounting for motion-dependent loading. This study integrates structural parameter selection, cycloidal trajectory planning, and actuator load prediction within a unified kinematic, static, and dynamic model. Discrete wire-rope attachment positions are screened by direct enumeration. A compromise design is selected using Pareto analysis and a weighted ideal-point method, with the influence of the objective weights assessed through sensitivity analysis. With the reference weights, the selected attachment position of 0.78 m provides a working swing range of 37.39° and a peak static cylinder force of 4.181 kN. A cycloidal trajectory is mapped from main-arm rotation to cylinder motion and evaluated for durations of 3, 6, and 12 s. Shorter motion durations increase inertial loading, while gravity remains the dominant load component. For the 6 s motion, the predicted peak driving force and peak absolute mechanical power are 4.250 kN and 578.4 W, respectively. MATLAB–CoppeliaSim co-simulation shows overall kinematic trends consistent with the analytical predictions. Prototype functional testing demonstrates the feasibility of main-arm lifting during cleaning-module retraction without observed mechanical interference. Together, these results provide an engineering basis for selecting the wire-rope attachment position and motion duration while accounting for the attainable working swing range and predicted actuator loads.
Authors
- Chunlei Wang (ORCID: https://orcid.org/0000-0001-9191-266X)
- 韩 玲 HAN Ling
- Baolin Dai (ORCID: https://orcid.org/0000-0003-4332-135X)
- Huifeng Ning (ORCID: https://orcid.org/0009-0007-3816-7163)
- Ru Kang
- Yanbin Zhao
- Cuiming Li
Institutions
- Lanzhou University of Technology (CN)
- Lanzhou Jiaotong University (CN)
Publication Details
- Journal
- Applied Sciences
- Published
- 2026-11-17
- DOI
- https://doi.org/10.3390/app162211389
- Primary Topic
- Robotic Mechanisms and Dynamics
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Natural Science Foundation of China