Mechanical performance analysis and construction technology of novel sealing walls in coal mine connecting roadways
To address the deficiencies of traditional sealing walls, such as low construction efficiency, susceptibility to failure, and poor airtightness, this paper proposes a novel sealing wall with equivalent thickness. Based on elastic thin-plate theory, their load-bearing mechanisms are compared; through numerical simulation, their mechanical responses under mining conditions are analyzed; relying on a self-developed vehicle-mounted integrated backfilling system, process linkage tests and underground industrial practices are carried out to evaluate the feasibility of the innovative construction method and the service reliability under mining conditions. The results show that the novel sealing wall achieves collaborative load bearing, with maximum bending moment reduced by 89% and maximum shear force reduced by 66.67%; the overlying roof transitions from a tensile to a compressive stress state; the high-stress (>10 MPa) zone shrinks by approximately 84%, and the low-stress (<5 MPa) zone expands by about 107.7%. The self-developed vehicle-mounted integrated backfilling system enables material delivery from surface mixing to continuous underground pouring, and the new construction method integrates innovative processes: “full-section mechanical slotting and embedding, flexible-formwork support and suspension, micro-pressurized roof contact, and flexible-formwork backfilling”. These achieve multiple engineering objectives: structural stability, air-tightness, and low cost (reduced by 52%), demonstrating favorable economic benefits and engineering prospects, and providing an effective solution for rapid sealing in roadways subjected to intense mining pressure and sudden emergencies.
Authors
- Dehai Lin
- Xia Wang
- Yang Dong
- Dong Zhang
- Siyu Gong
- Jingzhu Huang
- Rui Wu
Institutions
- National Institute of Clean and Low-Carbon Energy (CN)
- Jiangxi University of Science and Technology (CN)
Publication Details
- Journal
- Scientific Reports
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1038/s41598-026-77563-w
- Primary Topic
- Geomechanics and Mining Engineering
- Type
- article
- Field-Weighted Citation Impact
- 0.00