Performance-Based Balanced Mix Design of Slag-Modified Stone Mastic Asphalt Stabilized with Natural Coconut Fiber
This study evaluated the mechanical and environmental performance of stone mastic asphalt (SMA) containing 50% steel slag as coarse aggregate and 0.5% coconut fiber using a Balanced Mix Design (BMD) and performance-based life cycle assessment. The slag-modified SMA required a slightly higher optimum binder content (6.7%) than the control (6.4%) but showed substantially improved rutting and cracking resistance with comparable fatigue performance. Moisture resistance decreased, with the Tensile Strength Ratio (TSR) declining from 97.6% to 84.5%, although remaining above the 80% specification. Higher indirect tensile strength and CTIndex values indicated enhanced cracking resistance due to improved aggregate interlocking and aggregate–binder interaction. Although raw material production and mixture manufacturing caused slightly higher CO₂ emissions, lower annualized emissions were achieved when extended service life was considered. A break-even point occurred at approximately 6% service-life extension, demonstrating that durability improvements can offset the initial carbon penalty.
Authors
- Van Phuc Le (ORCID: https://orcid.org/0000-0002-0544-0537)
- Hong Lam Vo
Institutions
- University of Transport and Communications (VN)
Publication Details
- Journal
- Canadian Journal of Civil Engineering
- Published
- 2026-11-17
- DOI
- https://doi.org/10.1139/cjce-2026-0359
- Primary Topic
- Asphalt Pavement Performance Evaluation
- Type
- article
- Field-Weighted Citation Impact
- 0.00