Microstructural Characteristics and Structure–Property Correlations in Nano‐Ag‐Modified YBa 2 Cu 3 O 7 − y Superconducting Ceramics

ABSTRACT This study systematically investigates the influence of nano‐Ag/Y partial incorporation (0.00 ≤ x ≤ 0.20) on the microstructural characteristics, electrical‐superconducting transport, and mechanical response of bulk YBa 2 Cu 3 O 7− y (Y‐123) ceramics. Particular emphasis is placed on SEM‐based microstructural characterization and comparative image analysis to examine composition‐dependent morphological variations and their relationship with the measured functional properties. Temperature‐dependent electrical resistivity (60–100 K), transport critical current density ( J c ), scanning electron microscopy (SEM), image‐based microstructural analysis, and Vickers microhardness ( H v ) measurements are employed to establish correlations between microstructural characteristics and macroscopic properties. The obtained results indicate a pronounced dependence of the electrical, superconducting, and mechanical responses on the Ag incorporation level. The Ag‐doped Y‐123 ceramic structure prepared with x = 0.03 incorporation exhibits favorable superconducting transport characteristics, with onset and offset transition temperatures of 92.81 and 91.72 K, respectively, corresponding to a narrow transition width of 1.09 K. The transport critical current density also reaches 87 A cm −2 at this ceramic structure. SEM observations and comparative image analysis reveal a relatively homogeneous morphology with well‐developed grains and fewer apparent defect‐ or porosity‐related features, providing complementary microstructural evidence for the measured transport behavior. The recorded observations are consistent with the possibility of improved current‐carrying pathways and reduced weak‐link effects, although the present characterization does not directly establish specific flux‐pinning mechanisms. Mechanical measurements further show that x = 0.03 Ag‐containing substitution level exhibits the highest experimentally measured Vickers microhardness within the investigated series. The corresponding elastic modulus, yield strength, stiffness parameter, shear modulus, and modulus of resilience are subsequently estimated from the hardness data using semi‐empirical relationships and are accordingly interpreted as hardness‐derived comparative parameters rather than independently measured mechanical properties. At higher Ag incorporation levels, both the electrical‐superconducting and indentation responses deteriorate, accompanied by increasingly heterogeneous surface morphology in the SEM observations. All in all, the results indicate that the Ag addition level of x = 0.03 provides the most favorable combination of measured superconducting transport, microstructural characteristics, and indentation hardness among the investigated ceramic structures. The findings indicate that SEM and comparative image analysis provide useful complementary approaches for relating microstructural variations to the functional behavior of Ag‐modified Y‐123 ceramics.

Authors

Institutions

Publication Details

Journal
Microscopy Research and Technique
Published
2026-11-16
DOI
https://doi.org/10.1002/jemt.70199
Primary Topic
Physics of Superconductivity and Magnetism
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Microstructural Characteristics and Structure–Property Correlations in Nano‐Ag‐Modified YBa 2 Cu 3 O 7 − y Superconducting Ceramics

Ferhat Demiray, Bahadir Akkurt, Asaf Tolga Ülgen, T. Turgay et al.
Microscopy Research and Technique
Physics of Superconductivity and Magnetism
article

Microstructural Characteristics and Structure–Property Correlations in Nano‐Ag‐Modified YBa 2 Cu 3 O 7 − y Superconducting Ceramics

Ferhat Demiray, Bahadir Akkurt, Asaf Tolga Ülgen, T. Turgay, Ali Serol Ertürk, C. Terzioğlu, G. Yıldırım
article en

Abstract

ABSTRACT This study systematically investigates the influence of nano‐Ag/Y partial incorporation (0.00 ≤ x ≤ 0.20) on the microstructural characteristics, electrical‐superconducting transport, and mechanical response of bulk YBa 2 Cu 3 O 7− y (Y‐123) ceramics. Particular emphasis is placed on SEM‐based microstructural characterization and comparative image analysis to examine composition‐dependent morphological variations and their relationship with the measured functional properties. Temperature‐dependent electrical resistivity (60–100 K), transport critical current density ( J c ), scanning electron microscopy (SEM), image‐based microstructural analysis, and Vickers microhardness ( H v ) measurements are employed to establish correlations between microstructural characteristics and macroscopic properties. The obtained results indicate a pronounced dependence of the electrical, superconducting, and mechanical responses on the Ag incorporation level. The Ag‐doped Y‐123 ceramic structure prepared with x = 0.03 incorporation exhibits favorable superconducting transport characteristics, with onset and offset transition temperatures of 92.81 and 91.72 K, respectively, corresponding to a narrow transition width of 1.09 K. The transport critical current density also reaches 87 A cm −2 at this ceramic structure. SEM observations and comparative image analysis reveal a relatively homogeneous morphology with well‐developed grains and fewer apparent defect‐ or porosity‐related features, providing complementary microstructural evidence for the measured transport behavior. The recorded observations are consistent with the possibility of improved current‐carrying pathways and reduced weak‐link effects, although the present characterization does not directly establish specific flux‐pinning mechanisms. Mechanical measurements further show that x = 0.03 Ag‐containing substitution level exhibits the highest experimentally measured Vickers microhardness within the investigated series. The corresponding elastic modulus, yield strength, stiffness parameter, shear modulus, and modulus of resilience are subsequently estimated from the hardness data using semi‐empirical relationships and are accordingly interpreted as hardness‐derived comparative parameters rather than independently measured mechanical properties. At higher Ag incorporation levels, both the electrical‐superconducting and indentation responses deteriorate, accompanied by increasingly heterogeneous surface morphology in the SEM observations. All in all, the results indicate that the Ag addition level of x = 0.03 provides the most favorable combination of measured superconducting transport, microstructural characteristics, and indentation hardness among the investigated ceramic structures. The findings indicate that SEM and comparative image analysis provide useful complementary approaches for relating microstructural variations to the functional behavior of Ag‐modified Y‐123 ceramics.

Microscopy Research and Technique
Sakarya University (TR), Adıyaman University (TR), Şırnak University (TR), Bolu Abant İzzet Baysal University (TR)
Physics of Superconductivity and Magnetism
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon