Microwave Pre-treatment and Microstructural Evidence of Ore
Abstract This study seeks to investigate the effect of microwave pretreatment on the grindability of ore using single-mode and multimode configurations. Particle size distribution analysis and SEM microstructural characterization were employed to evaluate comminution efficiency. Results show that microwave pretreatment significantly enhanced size reduction, with pretreated samples achieving a P80 of approximately 80 μm after 60 minutes of grinding, compared to 400 μm for untreated ore. Multimode pretreatment produced more extensive microcrack networks and interconnected fractures than single-mode treatment, correlating with improved grinding performance. These findings demonstrate that microwave pretreatment is an effective method for weakening ore microstructure and reducing grinding energy consumption.
Authors
- Derrick Njabuliso Dlamini (ORCID: https://orcid.org/0000-0001-6212-5827)
Institutions
- Cape Peninsula University of Technology (ZA)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-17
- DOI
- https://doi.org/10.21203/rs.3.rs-11741417/v1
- Primary Topic
- Mineral Processing and Grinding
- Type
- preprint