Experimental Study and Response Surface Modeling of the Combined Effects of the Process Parameters on the Thermal and Mechanical Properties of Friction Stir Welded 3003 Aluminum Alloy

Abstract Friction stir welding (FSW) of AA3003 aluminum alloy is governed by the tool rotational speed (𝑁), feed rate (𝑆), and tilt angle (πœƒ). Earlier studies on this alloy have used these parameters to model either the tensile properties or the welding temperature, but these responses have rarely been analyzed together with the hardness of the weld zones. In this study, a three-level full factorial design and response surface methodology (RSM) were used to model four responses: the ultimate tensile strength (𝜎 U ), the maximum temperature (Tmax) recorded 10 mm from the weld centerline, and the hardness of the nugget zone (NZ) and the heat-affected zone (HAZ). Within the tested ranges, the tilt angle had the largest effect on Tmax, whereas the rotational speed had the largest effect on NZ hardness and 𝜎 U . Increasing 𝑁 or πœƒ raised Tmax and lowered the hardness of both zones, while 𝜎 U increased with 𝑁 and varied nonlinearly with 𝑆, with a minimum near the intermediate feed rate. A multi-response optimization that maximized 𝜎 U and hardness gave 𝑁 = 1000 rpm, 𝑆 = 400 mm/min, and πœƒ = 0.5Β°. At this setting, the predicted 𝜎 U and the NZ and HAZ hardness reached about 77%, 89%, and 80% of the base metal values, respectively. Eight independent validation tests gave coefficients of determination (RΒ²) between 0.818 and 0.919. The models describe the parameter effects within the tested domain and can support the selection of welding conditions for AA3003 joints.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-17
DOI
https://doi.org/10.21203/rs.3.rs-11501119/v1
Primary Topic
Advanced Welding Techniques Analysis
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Experimental Study and Response Surface Modeling of the Combined Effects of the Process Parameters on the Thermal and Mechanical Properties of Friction Stir Welded 3003 Aluminum Alloy

M. N. D. Cherief, Abdelkader Boulenouar, Abdelkader Miloudi, Amina Belaribi et al.
Research Square
Advanced Welding Techniques Analysis
preprint

Experimental Study and Response Surface Modeling of the Combined Effects of the Process Parameters on the Thermal and Mechanical Properties of Friction Stir Welded 3003 Aluminum Alloy

M. N. D. Cherief, Abdelkader Boulenouar, Abdelkader Miloudi, Amina Belaribi, Benmessaoud Mohammed Abdelghani, Mohammed Bouchelarm
preprint en

Abstract

Abstract Friction stir welding (FSW) of AA3003 aluminum alloy is governed by the tool rotational speed (𝑁), feed rate (𝑆), and tilt angle (πœƒ). Earlier studies on this alloy have used these parameters to model either the tensile properties or the welding temperature, but these responses have rarely been analyzed together with the hardness of the weld zones. In this study, a three-level full factorial design and response surface methodology (RSM) were used to model four responses: the ultimate tensile strength (𝜎 U ), the maximum temperature (Tmax) recorded 10 mm from the weld centerline, and the hardness of the nugget zone (NZ) and the heat-affected zone (HAZ). Within the tested ranges, the tilt angle had the largest effect on Tmax, whereas the rotational speed had the largest effect on NZ hardness and 𝜎 U . Increasing 𝑁 or πœƒ raised Tmax and lowered the hardness of both zones, while 𝜎 U increased with 𝑁 and varied nonlinearly with 𝑆, with a minimum near the intermediate feed rate. A multi-response optimization that maximized 𝜎 U and hardness gave 𝑁 = 1000 rpm, 𝑆 = 400 mm/min, and πœƒ = 0.5Β°. At this setting, the predicted 𝜎 U and the NZ and HAZ hardness reached about 77%, 89%, and 80% of the base metal values, respectively. Eight independent validation tests gave coefficients of determination (RΒ²) between 0.818 and 0.919. The models describe the parameter effects within the tested domain and can support the selection of welding conditions for AA3003 joints.

Research Square
Université Djilali de Sidi Bel Abbès (DZ)
Advanced Welding Techniques Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon