Integrated Centrifugal Pump Design Using 3D Modelling, Digital Twins, and Additive Prototyping
Centrifugal pump development still moves through separate islands of information: a one-dimensional sizing calculation, a manually built solid model, a physical prototype, and a drawing package produced after the geometry is frozen.This paper proposes and tests a design technology in which parametric 3D geometry, multi-fidelity CFD, a reduced-order digital twin, additively manufactured prototypes and machine-readable documentation are all views of one versioned design record.Thirty-four continuous variables plus one discrete blade number Z (35 optimisation variables in total) control the meridional channel and the blade loading, with manufacturability enforced inside the generator; a co-Kriging surrogate coupling coarse steady and fine transient cavitating simulations drives an NSGA-III search; a POD-Galerkin model corrected by an unscented Kalman filter forms the operational twin; and the sensitivity matrix produced by the optimiser is reused to allocate manufacturing tolerances.The framework was applied to three pumps of different duty (Case A, nq = 37.0; Case B, nq = 12.7; Case C, nq = 32.3;recalculated from Eq. ( 1) with Q in m³ s⁻¹) and validated against ISO 9906 Grade 1B tests.Three results are central.First, the two-level surrogate reached the same Pareto front quality as single-fidelity Kriging with 4.2 times fewer high-fidelity simulations, and measured best-point efficiency rose by 2.9-4.7 percentage points.Second, an equivalent-sand-roughness correction brought as-built selective laser melted prototypes to within 0.9 percentage points of cast production efficiency, against an uncorrected deficit of about 5 points, which turns a printed impeller into a quantitative performance predictor rather than a form-and-fit check.Third, in a two-unit field study over 4300 h the twin tracked head to 1.2 % mean absolute error and estimated wear-ring clearance to within 0.03 mm of the post-overhaul measurement.Design-cycle and documentation metrics from 14 releases are reported as associations rather than causal effects, since the comparison was not randomised.
Authors
- Yerkebulan Tuleshov (ORCID: https://orcid.org/0000-0002-9146-7137)
- Zhanibek Issabekov (ORCID: https://orcid.org/0000-0003-2900-8025)
- Moldir Kuatova (ORCID: https://orcid.org/0000-0002-7614-6124)
- Аmandyk Tuleshov (ORCID: https://orcid.org/0000-0001-9775-3049)
- Bexultan Kadyr
Institutions
- Satbayev University (KZ)
- Joldasbekov Institute of Mechanics and Engineering (KZ)
Publication Details
- Journal
- International journal of intelligent engineering and systems
- Published
- 2026-11-17
- DOI
- https://doi.org/10.22266/ijies2026.1231.51
- Primary Topic
- Cavitation Phenomena in Pumps
- Type
- article
- Field-Weighted Citation Impact
- 0.00