ROOT PARENTING LAYOUT OF GPS AND FIXATION OF FLOATING TOLERANCE FIELDS

The design of increasingly complex products places higher demands not only on the designers themselves but also on the tools and methodologies that would enable them to convey the requirements for the properties of a technical system (TS) simply, clearly, and accurately within the production company’s high-quality information framework. Design engineers face the challenge that current technical standards do not provide tools suitable for solving the range of problems that arise in this rapidly evolving era, nor do they offer the required flexibility in the tools and resources they provide. The development of geometric tolerancing is shifting from a static symbolic language toward an active information model that integrates design, virtual prototyping, manufacturing, measurement, and operational feedback. Tolerances are gradually becoming not only a decision-making criterion for accepting or rejecting a product, but above all one of the control parameters of a product’s digital thread. Design engineers must increasingly take into account and respect the fact that customers are becoming increasingly demanding and require high functionality and more precise adherence to the correct shape of products. Since the issue of tolerance fields is defined in standards in a relatively complex and unclear manner, this situation leads to various misinterpretations and to erroneous, confusing, and ambiguous definitions and misunderstandings of this important control tool. To improve clarity and ensure an unambiguous definition of tolerance fields and a precise expression of their movement in a given direction, we have proposed the introduction of a newly defined root parenting layout (RPL) into the GPS system, which, as an ancestor, can pass on properties to its descendants (heirs). A homogeneous RPL (HRPL) may consist of one or more individual structural elements (SE), or of continuously interconnected SEs forming a theoretically exact feature (TEF), which are controlled by a single basic geometric specification. If an HRPL consists of multiple SEs or TEFs, the geometric specification must be supplemented with a common tolerance zone (CZ) modifier. A non-homogeneous RPL (IRPL) may consist of several individual SEs or continuously interconnected SEs forming a TEF, which are defined by more than one basic geometric specification. An IRPL must be supplemented with a geometric specification that simultaneously utilizes both the theoretically precise geometric structures of the IRPL and the mutual relationships defined between TEFs and SEs (SIM). This paper aims to provide designers with more powerful and flexible tools for achieving more efficient and accurate information transfer both within and outside the manufacturing company, thereby contributing to the meaningful creation of an easily interpretable, functionally oriented, and normatively verifiable system that integrates geometric specification, tolerance analysis, manufacturability, measurement uncertainty, and operational data within a single digital thread throughout the entire TS lifecycle.

Authors

Publication Details

Journal
Veredas do Direito Direito Ambiental e Desenvolvimento Sustentável
Published
2026-11-16
DOI
https://doi.org/10.18623/rvd.v23.8904
Primary Topic
Manufacturing Process and Optimization
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

ROOT PARENTING LAYOUT OF GPS AND FIXATION OF FLOATING TOLERANCE FIELDS

Václav Vaněk
Veredas do Direito Direito Ambiental e Desenvolvimento Sustentável
Manufacturing Process and Optimization
article

ROOT PARENTING LAYOUT OF GPS AND FIXATION OF FLOATING TOLERANCE FIELDS

Václav Vaněk
article en

Abstract

The design of increasingly complex products places higher demands not only on the designers themselves but also on the tools and methodologies that would enable them to convey the requirements for the properties of a technical system (TS) simply, clearly, and accurately within the production company’s high-quality information framework. Design engineers face the challenge that current technical standards do not provide tools suitable for solving the range of problems that arise in this rapidly evolving era, nor do they offer the required flexibility in the tools and resources they provide. The development of geometric tolerancing is shifting from a static symbolic language toward an active information model that integrates design, virtual prototyping, manufacturing, measurement, and operational feedback. Tolerances are gradually becoming not only a decision-making criterion for accepting or rejecting a product, but above all one of the control parameters of a product’s digital thread. Design engineers must increasingly take into account and respect the fact that customers are becoming increasingly demanding and require high functionality and more precise adherence to the correct shape of products. Since the issue of tolerance fields is defined in standards in a relatively complex and unclear manner, this situation leads to various misinterpretations and to erroneous, confusing, and ambiguous definitions and misunderstandings of this important control tool. To improve clarity and ensure an unambiguous definition of tolerance fields and a precise expression of their movement in a given direction, we have proposed the introduction of a newly defined root parenting layout (RPL) into the GPS system, which, as an ancestor, can pass on properties to its descendants (heirs). A homogeneous RPL (HRPL) may consist of one or more individual structural elements (SE), or of continuously interconnected SEs forming a theoretically exact feature (TEF), which are controlled by a single basic geometric specification. If an HRPL consists of multiple SEs or TEFs, the geometric specification must be supplemented with a common tolerance zone (CZ) modifier. A non-homogeneous RPL (IRPL) may consist of several individual SEs or continuously interconnected SEs forming a TEF, which are defined by more than one basic geometric specification. An IRPL must be supplemented with a geometric specification that simultaneously utilizes both the theoretically precise geometric structures of the IRPL and the mutual relationships defined between TEFs and SEs (SIM). This paper aims to provide designers with more powerful and flexible tools for achieving more efficient and accurate information transfer both within and outside the manufacturing company, thereby contributing to the meaningful creation of an easily interpretable, functionally oriented, and normatively verifiable system that integrates geometric specification, tolerance analysis, manufacturability, measurement uncertainty, and operational data within a single digital thread throughout the entire TS lifecycle.

Veredas do Direito Direito Ambiental e Desenvolvimento SustentávelVol. 23(17)
Manufacturing Process and Optimization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon